DAP® DYNAFLEX 230® 18301 Premium Elastomeric Sealant, 10.1 fl-oz Cartridge, Gray, Latex/Oil Base
DAP® Dynaflex 230® delivers a "Silicone Tough" latex formulation for outstanding exterior performance against the elements. Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal. The paintable, durable sealant can fill gaps up to 1 in W and the cured sealant is mold and mildew resistant. It has excellent adhesion to a wide range of building materials including wood, MDF, PVC, polystyrene and composite trim board. Easy to gun out, tools smoothly and can be cleaned up with soap and water. Interior/exterior use. Meets ASTM Specification C920, Class 25.
-
BrandDAP®
-
UPC070798183018
-
Manufacturer Part Number18301
-
CountryUSA
-
Temperature Rating-30 to 180 deg F
-
Flammability Rating1
-
FormPaste
-
ColorGray
-
TypePremium
-
CompositionLimestone, Diethylene Glycol Dibenzoate, Diethylene Glycol Monobenzoate, Titanium Dioxide, Ethylene Glycol, Silica, Amorphous, Carbon Black, Quartz
-
VOC Content33.8 g/L
-
Container Size Range10.1 fl-oz
-
Container TypeCartridge
-
Applicable MaterialsWood, Metal, Brick, Aluminum, Glass, Concrete, Vinyl, Masonry, Most Plastic, Plaster, Drywall, Stucco, Stone, Painted Surfaces, Composite, PVC Trimboard
-
Base TypeLatex/Oil
-
Specific Gravity1.44
-
Drying Time2 to 4 hr
- Silicone tough
- 100% waterproof
- Paintable
- Superior flexibility and crack proof
- Seals joints up to 1 in W
- Easy water clean up and low odor
| Cross-Reference Number |
|---|
| 778451 |
-
UNSPSC31201713
-
Package Description12/CS
-
Standards/ApprovalsFederal Specification TT-S-00230C Type II Class A|ASTM C920 Class 25|ASTM C834
-
Specification Sheet
-
SDS
Recently Viewed
DAP® DYNAFLEX 230® 18301 Premium Elastomeric Sealant, 10.1 fl-oz Cartridge, Gray, Latex/Oil Base
DAP® Dynaflex 230® delivers a "Silicone Tough" latex formulation for outstanding exterior performance against the elements. Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal. The paintable, durable sealant can fill gaps up to 1 in W and the cured sealant is mold and mildew resistant. It has excellent adhesion to a wide range of building materials including wood, MDF, PVC, polystyrene and composite trim board. Easy to gun out, tools smoothly and can be cleaned up with soap and water. Interior/exterior use. Meets ASTM Specification C920, Class 25.
FYH® UCPAN207 20 UCPAN Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 4-11/32 in OAL 3-21/32 in OAH
FYH® UCPAN207 20 UCPAN Normal Duty Pillow Block Unit, 1-1/4 in Dia Bore, 3-1/4 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 4-11/32 in OAL 3-21/32 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Morse® 177191 MHS Advanced Hole Saw, 1-3/16 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 1/2-20 Arbor
Morse, MHS19 (177191), 1-3/16" (30mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use Morse MA24 (139007) or MA34 (139014). To optimize performance consider using Morse CUTLUBE (121408).
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
