ARC 70338-11 2" X 60" 220 GRIT ALUMINUM OXIDE Y-WEIGHT BELT PREMIUM
THE ARC ABRASIVES NARROW BELT IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, DEBURRING, FLASH REMOVAL, SURFACE PREPARATION, AND FINISHING. PERFECT FOR USE ON ALUMINUM AND VARIOUS METALS.
-ARC7033811 >
Recently Viewed
THE ARC ABRASIVES NARROW BELT IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, DEBURRING, FLASH REMOVAL, SURFACE PREPARATION, AND FINISHING. PERFECT FOR USE ON ALUMINUM AND VARIOUS METALS.
-ARC7033811 >
Mustang Leather Drivers Utility Work Gloves Premium A Grade Grain Goatskin Double Palm, Unlined Sewn with DuPont ™ Kevlar ® Sewn Wing Thumb This FR Glove has an Arc rating of 28.6 Cal/cm 2 The men and women who work in the electrical industry need gloves that match their hard work and dedication. Therefore, they rely on the industry leader to provide the best hand protection for them. The MCR Safety Mustang Utility field glove, made from top grain leather, provides the required dexterity to feel what you are working with while holding up well against abrasion. The MU3624 gloves feature premium A grade brown goatskin leather, a reinforced thumb crotch, double palms, fingertips, and knuckles. They are sewn with DuPont™ Kevlar® thread and have shirred elastic around the wrists and a comfortable wing thumb design. With an ARC rating of ATPV 28.6 cal/cm2 (HRC3 / CAT3) and a heat attenuation factor (HAF) of 94%, these gloves are safe and reliable. For the best leather glove options, choose MCR Safety.
BANJO M-200-FPT 2" FLANGE X 2" PIPE THREAD BRASS EXTERIOR FINISH
THE BANJO FLANGED CROSS IS AN EASY-TO-USE FITTING. IT INCLUDES POSITIVE SEALS WITH EASY ON/OFF HOSE CONNECTIONS. BUILDT WITH 360 DEGREE SEAL ORIENTATION AND A FITTING PRESSURE UP TO 125 PSI
-BAJM200CR >
KEVLAR V-BELTS-PIXA18K>
• Bore Diameter (Shaft Size): 3/4 inch (0.7500 in)
• Note: In imperial bearing nomenclature, the "-12" suffix designates the bore diameter in sixteenths of an inch (12/16" = 3/4").
• Housing Type: Pressed Steel Pillow Block with a Rubber Cushioning Ring
• Locking Mechanism: Set Screw Locking
• Replacement Insert Part Number: B4-12 (Narrow Inner Ring, Cylindrical O.D.)
• Housing Part Number: PP5
• Rubber Ring Part Number: R5
• Stamping Load Limit: 400 lbs
• Dynamic Load Rating: 2,890 lbf
• Static Load Rating: 1,500 lbf
2 GROOVE BANDED 3-V X-355 V-BELT-PIX3VX355/02 >
