71985 4-1/2" X 7/8" 40-grit Type 29 Flap Disc, Blue Zirconia, Depressed
4-1/2" X 7/8" 40-GRIT TYPE 29 FLAP DISC, BLUE ZIRCONIA, DEPRESSED CENTER-FOR71985 >
Recently Viewed
4-1/2" X 7/8" 40-GRIT TYPE 29 FLAP DISC, BLUE ZIRCONIA, DEPRESSED CENTER-FOR71985 >
Edison GDC-40MA Low Breaking Small Dimension Time Delay Fuse With Nickel Plated Brass End Caps, 40 mA, 250 V AC, 35 A, Cylindrical Body
Edison GDC-40MA Low Breaking Small Dimension Time Delay Fuse With Nickel Plated Brass End Caps, 40 mA, 250 VAC, 35 A, Cylindrical Body
Morse® Real McCoy® TA56 Hole Saw, 3-1/2 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
MORSE® 59632 5970 Wheel Brush, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-3/4 in OAL, Aluminum Cut
MORSE® 59632 5970 Wheel Brush, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, 2-3/4 in OAL, Aluminum Cut
NACHI NJ207 NJ200 Cylindrical Roller Bearing, 35 mm Dia Bore, 72 mm OD, 1 Row, 17 mm W, 33500 N Dynamic/31500 N Static Load
Cylindrical Roller Bearing – ‘NJ’ CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The ‘NJ’ Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
Proto® J46408 Hex Key, Cushion Grip/T-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
