BRUSH RESEARCH BC-1120-SC BC Series Small Diameter Standard Duty Flexible Cylinder Hone, 1 in Dia Bore, 3 in L Abrasive, 8 in OAL, 120 Grit
The BC Series Flex-Hone® tool is designed for use on any type or size of cylinder from 4 mm up to 3 in Dia. This cylinder hone is designed for surface finishing and cross hole deburring in brake cylinders, wheel cylinders, hydraulics, pneumatics and valve guides.
-
BrandFlex-Hone®
-
UPC843469115164
-
Manufacturer Part NumberBC10012
-
CountryUSA
-
Maximum Speed1200 rpm
-
TypeSmall Diameter Standard Duty
-
Grit120
-
Abrasive Length3 in
-
Abrasive MaterialSilicon Carbide
-
Applicable MaterialsMild Steel, Stainless Steel, Cast Iron, Softer Ferrous and Non-Ferrous Metals
-
SeriesBC Series
-
Bore Diameter1 in
-
Overall Length8 in
- Self centering, self aligning, self compensating for wear
- Can be used in virtually any rotating spindle
- Commonly used for finishing, deburring and edge breaking
- Typically achieves a finish of 35 to 50 Microinch (0.9 to 1.4 Micrometer)
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MJ731120 |
-
UNSPSC31191500
-
Package DescriptionEACH
-
Standards/ApprovalsSGS Certified|PROP65: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
-
Catalog
-
Technical Bulletin
Recently Viewed
BRUSH RESEARCH BC-1120-SC BC Series Small Diameter Standard Duty Flexible Cylinder Hone, 1 in Dia Bore, 3 in L Abrasive, 8 in OAL, 120 Grit
The BC Series Flex-Hone® tool is designed for use on any type or size of cylinder from 4 mm up to 3 in Dia. This cylinder hone is designed for surface finishing and cross hole deburring in brake cylinders, wheel cylinders, hydraulics, pneumatics and valve guides.
Browning® 1251529 Straight Type LR Bevel Gear Reducer, Shaft Input, Shaft Output, 1 hp, 2:1 Gear, 875 rpm Maximum Output, 36.013 in-lb Input/57.62 in-lb Output Torque Rating
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
3/4" -MALE PIPE THREADX5-1/2" BLACK NIPPLE-FIT3/4X51/2BN >
DOUBLE OPEN FACE HEAVY DUTY BALL BEARING-NTN6405 >
DOUBLE ROW OPEN FACE BALL BEARING - NTN5213>
747847 DO-IT-BEST/TENAX 3' H. X 100' L. PREASSEMBLED BLACK WOVEN GEOTEXTILE SILT FENCE
PREASSEMBLED SILT FENCE IS AN IDEAL BARRIER FOR SEDIMENT CONTROL AROUND CONSTRUCTION SITES OR WHEREEVER THERE IS BARE OR DISTUBED EARTH. THE WOVEN GEOTEXTILE USE IN SILT FENCE IS DESIGNED TO FILTER OUT SEDIMENT FROM CONSTRUCTION SITE RUN-OFF YET ALLOWS CLEAN WATER TO PASS THROUGH. THE USE OF SILT FENCE HELPS TO ENSURE A FREE DRAINING, ENVIRONMENTALLY SAFE SITE. SILT FENCE IS PREASSEMBLED WITH WOOD STAKES SECURLY ATTACHED AT 10 FOOT INTERVALS.
-JWH747847 >
