SAIT 1/2" W-189 MOUNTED POINTS SAI 27327
United Abrasives-SAIT 27327 Mounted Point, W189 Point, 1/2 in Dia x 2 in L Head, 1/4 in Dia Shank
-
BrandUnited Abrasives-SAIT
-
UPC699053273273
-
Manufacturer Part Number27327
-
CountryUSA|Canada
-
Maximum Speed24000 rpm
-
GradeVery Fine
-
GritA60
-
Abrasive MaterialAluminum Oxide
-
Head Diameter1/2 in
-
Head Length2 in
-
Shank Diameter1/4 in
-
Shank Length1-1/2 in
-
Bond TypeVitrified Porous
-
Overall Length3-1/2 in
- These mounted bonded points are a low cost alternative to carbide burs
- Each point is dressed for perfect balance to perform without vibration or run out
- Mandrel overhang
- Maximum speeds given refer to overhang
- For use with die grinders
-
UNSPSC23131514
-
Package Description10/BX
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
United Abrasives-SAIT 27327 Mounted Point, W189 Point, 1/2 in Dia x 2 in L Head, 1/4 in Dia Shank
MORSE® 51138 5374 Standard Length Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 51138 5374 Standard Length Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK50X1/2 >
Littelfuse® POWR-GARD® KLPC1000 Current Limiting Time Delay Fuse, 1000 A, 600 V AC/480 V DC, 20/200 kA Interrupt, L Class, Cylindrical Body
KLPC series POWR-PRO® fuses provide ideal over current protection for circuits from 200 through 6000 A. KLPC series POWR-PRO® fuses specification-grade construction and performance meet or exceed the most stringent project specifications: 99.9% pure silver links, silver plated copper end bells, glass reinforced melamine bodies, o-ring seals between body and end bells and granular quartz fillers. KLPC series POWR-PRO® fuses are the only UL listed Class L fuses that provide a minimum of ten seconds time delay at 500% rated current and are also as current limiting as the fastest class L fuse on the market. On average, the peak let through currents of KLPC series fuses are 10% less than any other "time delay" class L fuse.
19-PIECE PUNCH SET; INCLUDES PUNCH, CENTER PUNCH, AND HOLDER-ARS70550 >
Drillco 31E160CC 3100E Adjustable Round Split Die, M16x2 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
