DRILLCO Kronenflex® 70A043DC 7000A Miniature Cut-Off Wheel, No End Cut End, Cylindrical Head, 1/8 in Dia Head, 9/16 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
-
BrandDrillco
-
UPC045997292755
-
Manufacturer Part Number70A043DC
-
CountryUSA|Canada
-
Maximum Speed70000 rpm
-
TypeMiniature
-
Head Diameter1/8 in
-
Head MaterialSolid Carbide
-
Head ShapeCylindrical
-
Applicable MaterialsAluminum, Brass, Cast Iron, Copper, Magnesium Plastics, Steel and Stainless Steel
-
Series7000A
-
Cut TypeDouble
-
Shank Diameter1/8 in
-
Industry SpecificationSA-43
-
End TypePlain
-
Length of Cut9/16 in
- Miniature sizing for very fine work
- Double cut tooth design for aggressive material removal
- optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
- Throughout it's life, the double cut gives faster stock removal, less operator fatigue, and maintains a good finish on the widest possible variety of materials
- Miniature sizing for very fine work
- Double cut tooth design for aggressive material removal
- optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
-
SDS
-
Catalog
Recently Viewed
DRILLCO Kronenflex® 70A043DC 7000A Miniature Cut-Off Wheel, No End Cut End, Cylindrical Head, 1/8 in Dia Head, 9/16 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
Dichtomatik N70366 O-Ring, 366 Dash Number, 7.225 in ID x 7.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gardner Bender 10-126 Butt Splice, 12 to 10 AWG Conductor, 1.04 in L, Yellow
Dichtomatik N70433 O-Ring, 433 Dash Number, 5.475 in ID x 6.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ILSCO® SafetySub® USPA-500SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 500 kcmil Aluminum/Copper Conductor, Aluminum
ILSCO® SafetySub® USPA-500SS-DB Type USPA-SS Dual Rated In-Line Waterproof Splice, 10 AWG to 500 kcmil Aluminum/Copper Conductor, Aluminum
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
