DRILLCO SpyraKleen™ 7C132BDC 7000C Power Tube Brush, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
-
BrandDrillco
-
UPC045997295008
-
Manufacturer Part Number7C132BDC
-
CountryUSA|Canada
-
Maximum Speed40000 rpm
-
Head Diameter1/2 in
-
Head MaterialSolid Carbide
-
Head ShapeCylindrical
-
Applicable MaterialsAluminum, Brass, Cast Iron, Copper, Magnesium Plastics, Steel and Stainless Steel
-
Series7000C
-
Cut TypeDouble
-
Shank Diameter1/4 in
-
Industry SpecificationSC-5
-
End TypeRadius
-
Length of Cut1 in
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
- The double cut design also produces an easy to handle granular type chip, in most metals, as opposed to the conventional sliver type chips
- Throughout it's life, the double cut gives faster stock removal, less operator fatigue, and maintains a good finish on the widest possible variety of materials
- Double cut tooth design for aggressive material removal
- Optimal flute geometry for fast removal and fine finish
- Brazed shank for perfect concentricity and reduced vibrations
-
UNSPSC23251706
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
-
SDS
-
Catalog
Recently Viewed
DRILLCO SpyraKleen™ 7C132BDC 7000C Power Tube Brush, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
Dichtomatik 75102139 O-Ring, 217 Dash Number, 1.171 in ID x 1.449 in OD, FKM, 75 Shore A Durometer, Import, Custom 217-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
United Abrasives-SAIT 1AX Quick Ship™ 61100 Semi-Friable Coated Abrasive Belt, 1 in W x 30 in L, 120 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Dichtomatik 75102017 O-Ring, 022 Dash Number, 0.989 in ID x 1.129 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
United Abrasives-SAIT 28063 General Purpose Bench Grinding Wheel, 12 in Dia x 2 in THK, 1-1/2 in Center Hole, 36 Grit, Aluminum Oxide Abrasive
United Abrasives-SAIT Sait-Lok™ 77212 Heavy Duty Non-Woven Abrasive Disc, 3 in Dia, Coarse Grade, Aluminum Oxide Abrasive
