Dremel® 443 End Shape Specialty Brush, 1/8 in, Carbon Steel Fill
Dremel® 443 End Shape Specialty Brush, 1/8 in, Carbon Steel Fill
-
BrandDremel®
-
UPC080596004439
-
Manufacturer Part Number443
-
CountryUSA
-
Fill MaterialCarbon Steel
-
Maximum Speed15000 rpm
-
TypeEnd Shape
-
Shank Diameter1/8 in
-
Overall Length1-3/4 in
-
Brush Diameter1/8 in
- Use on items made of brass, copper or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts
- Can also use wire brushes to create an artistic effect on coarse grained wood
- Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1UH67 |
| 355993 |
-
UNSPSC31191521
Recently Viewed
Dremel® 443 End Shape Specialty Brush, 1/8 in, Carbon Steel Fill
40-B-32-F-5/8 32 Tooth Sprockets For #40
32 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B32F5/8 >
220061 3/8"-female Pipe Thread Stainless Steel Female Quick Connect Coupler
3/8"-FEMALE PIPE THREAD STAINLESS STEEL FEMALE QUICK CONNECT COUPLERS
Dichtomatik N70124 O-Ring, 124 Dash Number, 1.237 in ID x 1.443 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62042RSNR >
Square D™ 8910DPA33V09 3-Phase Electromechanical Type DPA Definite Purpose Contactor, 208/220/240 V AC V Coil, 30 A, 3NO Contact, 3 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
