60217 Sanding Drum Kit, 1/8" Mandrel & 4 Sanding Drums 1/2" X 1/2" (5-piece) Includes Mounted Rubber Drum With 1/8" Shaft And Fine, Medium And Coarse Grit Sanding Sleeves. Maxrpm: 15.
SANDING DRUM KIT, 1/8" MANDREL & 4 SANDING DRUMS 1/2" X 1/2" (5-PIECE) INCLUDES MOUNTED RUBBER DRUM WITH 1/8" SHAFT AND FINE, MEDIUM AND COARSE GRIT SANDING SLEEVES. MAXRPM: 15.000-FOR60217 >
Recently Viewed
60217 Sanding Drum Kit, 1/8" Mandrel & 4 Sanding Drums 1/2" X 1/2" (5-piece) Includes Mounted Rubber Drum With 1/8" Shaft And Fine, Medium And Coarse Grit Sanding Sleeves. Maxrpm: 15.
SANDING DRUM KIT, 1/8" MANDREL & 4 SANDING DRUMS 1/2" X 1/2" (5-PIECE) INCLUDES MOUNTED RUBBER DRUM WITH 1/8" SHAFT AND FINE, MEDIUM AND COARSE GRIT SANDING SLEEVES. MAXRPM: 15.000-FOR60217 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
TCM120X140X13TC>
JASON 20008M50 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 50 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M50 >
ISOSTATIC™ Oilube® 401058 Round Bore Sleeve Bearing, 5/16 in Dia Bore, 7/16 in OD, 3/4 in W
ISOSTATIC™ Oilube® 302064 Round Bore Flange Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W, 1-1/8 in Dia Flange
