Copper Building Wires - THHN & T90
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry available in sizes 14 AWG through 2 AWG, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
Southwire® Armorlite® 68579201 Type MC/THHN Building Wire, Coil Packaging, 600 V AC, (2) 14 AWG Solid Copper Conductor, 250 ft L, Black/Green/White
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
Southwire® Armorlite® 68583401 Type MC/THHN Building Wire, Coil Packaging, 600 V AC, (3) 12 AWG Solid Copper Conductor, 250 ft L, Black/Green/Red/White
Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90 degree C dry available in sizes 14 AWG through 2 AWG and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.
Southwire® SIMpull THHN® 11581683 Type THHN/THWN/AWM Building Wire, Spool Packaging, 600 V, (1) 14 AWG Solid Copper Conductor, 50 ft L, Red
THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts.
Southwire® SIMpull THHN® 11596457 Type THHN/THWN/AWM Building Wire, Spool Packaging, 600 V, (1) 10 AWG Solid Copper Conductor, 500 ft L, White
THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts.
Southwire® SIMpull THHN® 11597257 Type THHN/THWN/AWM Building Wire, Spool Packaging, 600 V, (1) 10 AWG Solid Copper Conductor, 500 ft L, Red
THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts.
Recently Viewed
NORMAL DUTY 1-1/4" -ID CAST IRON WIDE SLOT TAKE-UP BEARING-BRWVTWE220 >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA106K>
4" X 1-1/4" 300# SWIVEL CASTERS-PJCLT414PH52S >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER
. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB127K>
3/8" X 25' STEEL TUBING (COILS)-AGSBLC625 >
1/2" X 3/4" ZINC OFFSET NIPPLE - APLRN50>
