Traffic Barricade & Cone Accessories
18" ACRYLIC FULL DOME MIRROR-LLBAV18F>
18" ACRYLIC FULL DOME-LENS ONLY-LLBAV18FL>
18" 180-DEGREE VIEW HALF DOME MIRROR-LLBAV18H >
26" 360-DEG VIEW FULL DOME MIRRORS-LLBAV26F>
26 200-DEGREE VIEW HALF DOME MIRROR-LLBAV26H >
32" 360-DEGREE FULL DOME MIRRORS-LLBAV32F>
36" 360-DEG VIEW FULL DOME MIRRORS-LLBAV36F>
Recently Viewed
6" X 1/16" X 5/8" STEEL CUTOFF WHEEL, METAL TYPE 1 WITH 5/8" ARBOR.-FOR71799 >
14-OZ TUBE LITHIUM GREASE-TEXMULTIFAKEP2 >
1-1/2" -MALE PIPE THREADX3-1/2" STAINLESS STEEL NIPPLE-FIT11/2X31/2SSN >
Proto® TorquePlus™ J1227MASD Anti-Slip Design Combination Wrench, Metric, 27 mm, 12 Points, 15 deg Offset, 15 in OAL, Alloy Steel, Satin, ASME B107.100
36122 RIDGID Model 404 Instrument Bender, 1/4" OD Tube Capacity, 5/8" Bend Radius
Description
–
Model 404 Instrument Bender, 1/4" OD Tube Capacity, 5/8" Bend Radius
Product Features
Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°.
Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
Inch and metric sizes.
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
