Protective Elbow & Knee Pads
HEAVY DUTY KNEE PAD >SOLD IN PAIRS-JWH323019 >
HEAVY-DUTY FLOORING KNEEPADS-JWH351951 >
PAIR OF PLASTIC CAP KNEE PADS-JWH375322 >
Alta® 50903 Proline™, Plastic Cap, Neoprene Foam/High Density Rubber Pad, Hook and Loop Closure, 2 Straps, White/Navy
Alta® 50903 Proline™, Plastic Cap, Neoprene Foam/High Density Rubber Pad, Hook and Loop Closure, 2 Straps, White/Navy
Black Stallion® FKP Durable Knee Pad, Poly Cap, Nylon Pad, Quick Fasten Buckle Closure
Black Stallion® FKP Durable Knee Pad, Poly Cap, Nylon Pad, Quick Fasten Buckle Closure
CLC® 317, Rubber Cap, Rubber Pad, Web Strap, Brown
CLC® G340, Closed Cell Foam Pad, Neoprene/Elastic Strap, 2 Straps, Black
CLC® G340, Closed Cell Foam Pad, Neoprene/Elastic Strap, 2 Straps, Black
CLC® V230 Swivel Cap Style, Plastic Cap, Elastic Strap, 2 Straps, Black/White
CLC® V230 Swivel Cap Style, Plastic Cap, Elastic Strap, 2 Straps, Black/White
Dottie® 361CLC Non Skid Kneepad, High Density Foam Pad, Memory-Flex Synthetic Rubber Strap, 4 Straps, Grey
Dottie® 361CLC Non Skid Kneepad, High Density Foam Pad, Memory-Flex Synthetic Rubber Strap, 4 Straps, Grey
Recently Viewed
Milwaukee® 48-20-5145 Heavy Duty Thick Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee®'s SDS Max and Spline thick wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
RIDGID® 37570 12-R Hand Threader Die Head, 1/2 in Nominal, NPSM Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 12-R Manual Pipe Threaders
RIDGID® 37570 12-R Hand Threader Die Head, 1/2 in Nominal, NPSM Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 12-R Manual Pipe Threaders
BANJO M-100-125-BRB-90 1" MANIFOLD FLANGE X 1-1/4" HOSE BARB 90 DEGREE ELBOW
THE BANJO M100125BRB90 1" MANIFOLD FLANGE X 1-1/4" HOSE BARB 90 DEGREE ELBOW IS AN EASY-TO-USE FITTING. THE POLY COUPLING INCLUDES POSITIVE SEALS WITH EASY ON/OFF HOSE CONNECTIONS. BUILT WITH 360 DEGREE SEAL ORIENTATION AND A FITTING PRESSURE UP TO 150 PSI
-BAJM100125BRB90 >
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Milwaukee® 48-20-6708 Drill Bit, 1/2 in Drill Bit, 1/2 in Shank SDS-Plus Shank, 16 in D Cutting, 18 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
