A-B-C-D-E SHEAVES
BK-26X3/4 Single Groove 3/4" -ID A Or B-belt
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-BRWBK26X3/4 >
BK-26X5/8 Single Groove 5/8" -ID A Or B-belt
SINGLE GROOVE 5/8" -ID A OR B-BELT SHEAVES-BRWBK26X5/8 >
BK-26X7/8 Single Groove 7/8" -ID A Or B-belt
SINGLE GROOVE 7/8" -ID A OR B-BELT SHEAVES-BRWBK26X7/8 >
BK-27X1/2 Single Groove 1/2" -ID A Or B-belt
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK27X1/2 >
BK-27X3/4 Single Groove 3/4" -ID A Or B-belt
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-BRWBK27X3/4 >
BK-27X5/8 Single Groove 5/8" -ID A Or B-belt
SINGLE GROOVE 5/8" -ID A OR B-BELT SHEAVES-BRWBK27X5/8 >
BK-27X7/8 Single Groove 7/8" -ID A Or B-belt
SINGLE GROOVE 7/8" -ID A OR B-BELT SHEAVES-BRWBK27X7/8 >
BK-28X1/2 Single Groove 1/2" -ID A Or B-belt
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK28X1/2 >
BK-28X3/4 Single Groove 3/4" -ID A Or B-belt
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-BRWBK28X3/4 >
BK-28X5/8 Single Groove 5/8" -ID A Or B-belt
SINGLE GROOVE 5/8" -ID A OR B-BELT SHEAVES-BRWBK28X5/8 >
BK-28X7/8 Single Groove 7/8" -ID A Or B-belt
SINGLE GROOVE 7/8" -ID A OR B-BELT SHEAVES-BRWBK28X7/8 >
BK-30X1/2 Single Groove 1/2" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 1/2" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK30X1/2 >
BK-30X3/4 Single Groove 3/4" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 3/4" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK30X3/4 >
BK-30X5/8 Single Groove 5/8" -ID A Or B-belt Cast Iron H-bushing
This sheave is a 3.15-inch diameter, single-groove cast iron pulley with a 5/8-inch bore, designed to transmit power through belt drive in heating, ventilation, and air conditioning (HVAC) and industrial systems.
BK-30X7/8 Single Groove 7/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 7/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK30X7/8 >
BK-32X1/2 Single Groove 1/2" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 1/2" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK32X1/2 >
BK-32X3/4 Single Groove 3/4" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 3/4" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK32X3/4 >
BK-32X5/8 Single Groove 5/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 5/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK32X5/8 >
BK-32X7/8 Single Groove 7/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 7/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK32X7/8 >
BK-34X1-1/8 Single Groove 1-1/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 1-1/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK34X11/8 >
BK-34X1/2 Single Groove 1/2" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 1/2" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK34X1/2 >
BK-34X3/4 Single Groove 3/4" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 3/4" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK34X3/4 >
BK-34X5/8 Single Groove 5/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 5/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK34X5/8 >
BK-34X7/8 Single Groove 7/8" -ID A Or B-belt Cast Iron H-bushing
SINGLE GROOVE 7/8" -ID A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK34X7/8 >
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
5-TON TROLLEY-JET252050 >
Klein® 79212 Hex Key, T-Handle Handle, Steel
Wilton® Brute Force™ 27207 Bridge/Boiler Short Spindle C-Clamp, 3-1/8 in D Throat, 2-1/4 to 5-1/2 in Jaw Opening, 7/8 in Screw
Wilton® Brute Force™ 27207 Bridge/Boiler Short Spindle C-Clamp, 3-1/8 in D Throat, 2-1/4 to 5-1/2 in Jaw Opening, 7/8 in Screw
Klein® Cushion-Grip® 600-4 Heavy Duty Screwdriver, 1/4 in Slotted Point, Steel Shank, 8-11/32 in OAL, Acetate Handle, Polished Chrome, ANSI/ASME Specified
Klein Tools Keystone-Tip Screwdrivers are designed for demanding applications. The precision machined tip provides an exact fit. Durable Cushion-Grip™ handles are designed for comfort and added torque.
