A-B-C-D-E SHEAVES
AK-074-H Single Groove H-bush A-belt
SINGLE GROOVE H-BUSH A-BELT SHEAVES-IDCAK074H >
AK-104X5/8 Single Groove A-belt Sheave With 5/8"
SINGLE GROOVE A-BELT SHEAVE WITH 5/8" -ID-BRWAK104X5/8 >
AK-109-H Single Groove 10.75" X 10.50" X 10.18" A-belt For Use With H-bushing
SINGLE GROOVE 10.75" X 10.50" X 10.18" A-BELT FOR USE WITH H-BUSHING SHEAVES-BRWAK109H >
AK-114-H Single Groove A-belt H-bush
SINGLE GROOVE A-BELT H-BUSH SHEAVES-IDCAK114H >
AK-114X1.3/16 Single Groove A-belt Sheave With 1-3/16" - ID-brwak114x1.
SINGLE GROOVE A-BELT SHEAVE WITH 1-3/16" - ID-BRWAK114X1.3/16 >
AK-124-H Single Groove 12.25" X 12." X 11.66 A-belt For Use With H-bushing
SINGLE GROOVE 12.25" X 12." X 11.66 A-BELT FOR USE WITH H-BUSHING SHEAVES-BRWAK124H >
AK-124X1.3/16 Single Groove A-belt Sheave With 1-3/16" - ID-brwak124x1.
SINGLE GROOVE A-BELT SHEAVE WITH 1-3/16" - ID-BRWAK124X1.3/16 >
AK-134X1.3/16 Single Groove A-belt Sheave With 1-3/16" - ID-brwak134x1.
SINGLE GROOVE A-BELT SHEAVE WITH 1-3/16" - ID-BRWAK134X1.3/16 >
AK-144X1.3/16 Single Groove A-belt Sheave With 1.3/16" -ID-brwak144x1.
SINGLE GROOVE A-BELT SHEAVE WITH 1.3/16" -ID-BRWAK144X1.3/16 >
AK-144X3/4 Single Groove A-belt Sheave With 3/4"
SINGLE GROOVE A-BELT SHEAVE WITH 3/4" -ID-BRWAK144X3/4 >
AK-154-H 1-groove A-belt H-bushing Sheave
1-GROOVE A-BELT H-BUSHING SHEAVE - IDCAK154H>
AK-17X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK17X1/2 >
AK-17X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK17X5/8 >
AK-20X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK20X1/2 >
AK-20X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK20X3/4 >
AK-20X5/8 Single Groove5/8" -ID A-belt
SINGLE GROOVE5/8" -ID A-BELT SHEAVES-BRWAK20X5/8 >
AK-22X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK22X1/2 >
AK-22X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK22X3/4 >
AK-22X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK22X5/8 >
AK-23X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK23X1/2 >
AK-23X3/4 Single Groove 3/4" -ID A-belt
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK23X3/4 >
AK-23X5/8 Single Groove 5/8" -ID A-belt
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK23X5/8 >
AK-25X1/2 Single Groove 1/2" -ID A-belt
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK25X1/2 >
Recently Viewed
BRUSH-WEI44314 >
16-MALE JICX12-MORB 90 DEGREE HYDRAULIC ADAPTER-DAY68011612 >
Rex® 10437336 2000 Fixed Normal Duty Take-Up Spherical Roller Bearing Unit, 1-15/16 in Bore Dia, 6-3/16 in L x 3-1/8 in W x 4-1/2 in H, 28890 lb Dynamic/33200 lb Static Load
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
Browning 32-TOOTH H-BUSH #40 CHAIN SPROCKET BRW H-40-H-32
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
United Abrasives-SAIT 27320 Mounted Point, W204 Point, 3/4 in Dia x 3/4 in L Head, 1/4 in Dia Shank
