A-B-C-D-E SHEAVES
2-AK-41X1-1/8 2-grv Cast Iron Sheave With Split Taper Bushing 1-1/8" Bore, Uses 4l Or A
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 1-1/8" BORE, USES 4L OR A BELT-BRW2AK41X11/8 >
2-AK-41X7/8 2-grv Cast Iron Sheave With Split Taper Bushing 7/8" Bore, 4l Or A
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 7/8" BORE, 4L OR A BELT-BRW2AK41X7/8 >
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING, USES 4L OR A-BELT-BRW2AK44H >
2-AK-51X1-1/8 2-grv Cast Iron Sheave With Split Taper Bushing 1-1/8" Bore, Uses 4l
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 1-1/8" BORE, USES 4L OR A-BELT-BRW2AK51X11/8 >
2-AK-54X1-3/8 2-grv Cast Iron Sheave With Split Taper Bushing 1-3/8" Bore, Uses 4l
2-GRV CAST IRON SHEAVE WITH SPLIT TAPER BUSHING 1-3/8" BORE, USES 4L OR A-BELT-BRW2AK54X13/8 >
V-Belt Pulley - 4L, 5L, A, B Belt Section, 2 Groove, Bushing Required Bore Size, 5.7500 in O.D., Split Taper Bushed, H Series Bushing, Cast Iron Material
V-Belt Pulley - 4L, 5L, A, B Belt Section, 2 Groove, Bushing Required Bore Size, 7.2500 in O.D., Split Taper Bushed, H Series Bushing, Cast Iron Material
2-GRV A OR B-BELT SDS-BUSH SHEAVES-IDC2B048SDS >
2-GRV A OR B-BELT SDS-BUSH SHEAVES-IDC2B058SDS >
Browning 2B110SK V-Belt Sheave Features:
- 11.35 Inch OD.
- Cast Iron.
- Two Groove.
- Q-D.
- Used With SK Series Bushings For A and B Series Belts.
Additional Features:
The Browning 2B110SK is a heavy-duty, two-groove cast iron sheave designed for industrial power transmission using A or B section V-belts. It features a 11.35-inch outside diameter and utilizes a QD Quick Detachable SK bushing system.
2-GRV A OR B-BELT SK-BUSH SHEAVES-IDC2B184SK >
2-GRV A OR B-BELT SF-BUSH SHEAVES-IDC2B200SF >
2-GRV A OR B-BELT SH-BUSH SHEAVES-BRW2B34SH >
2-GRV A OR B-BELT SH-BUSH SHEAVES-BRW2B38SH >
2-GRV B OR 5-V-BELT SHEAVES-BRW2B5V136 >
2-GRV B OR 5-V-BELT SHEAVES-BRW2B5V184 >
2-GRV B OR 5-V-BELT SHEAVES-BRW2B5V278 >
2-GRV B OR 5-V-BELT SHEAVES-BRW2B5V46 >
2-GRV B OR 5-V-BELT SHEAVES-BRW2B5V56 >
The Browning 2B5V64 Fixed Pitch Pulley is a durable and efficient mechanical component designed for industrial use. It comes with two grooves and requires a B bushing for installation. Suitable for A, B, and 5V belts, this pulley is constructed with heavy-duty materials to ensure longevity and performance.
2 grooves for multiple belt types
6.68-inch diameter
Requires B bushing
2-GRV A OR B-BELT SDS-BUSH SHEAVES-BRW2B50SDS >
The Browning 2B60SDS is a 6.35" Q-D 2 Groove Sheave. This sheave is made of cast iron and has a QD bushing. It is designed to be used with a variety of belts, including V-belts, serpentine belts, and timing belts. The 2B60SDS has a maximum bore size of 1-1/2" and a maximum speed of 3600 RPM. It is also available in a variety of other sizes and configurations to meet your specific needs.
Specifications
Item Number 2B60SDS
Brand Browning
2-GRV A OR B-BELT SK-BUSH SHEAVES-BRW2B70SK >
2-GRV A OR B-BELT SK-BUSH SHEAVES-BRW2B74SK >
Recently Viewed
United Abrasives-SAIT 84214 Sanding Sheet, 11 in L x 9 in W, 80 Grit, Aluminum Oxide Abrasive, Paper Backing
Dodge® 004250 D-Flex Type JES Coupling Sleeve, 07 Coupling, 2-3/16 in L, 5250 rpm Max, EPDM Rubber
Dodge® 004250 D-Flex Type JES Coupling Sleeve, 07 Coupling, 2-3/16 in L, 5250 rpm Max, EPDM Rubber
Browning® 3549409 Type B Synchronous Belt, 150 Teeth, 8 mm Pitch, 1200 mm OAL, 20 mm W, Neoprene
National Hardware® N146-373 V518 Non-Removable Pin Hinge With Aluminum Wire, 28 lb, Zinc Plated
National Hardware® N146-373 V518 Non-Removable Pin Hinge With Aluminum Wire, 28 lb, Zinc Plated
GENERAL® 1280M Hole Punch, 1/2 in Hallow Punch, Forged Steel
Makita® "Stubby" finder/driver, retracting screw holder features a convenient sleeve design that makes it easy to drive screws with one hand. Holds and drives screws without wobble or disengaging from the bit. Durable steel construction and industrial quality make for long life. For use in a variety of fastening applications including deck building and framing.
