OIL SEALS
1.575" X 1.969" X .157" OIL SEAL - CHI15740>
1.575" X 2.165" X .328" OIL SEAL-CHI15746 >
OIL SEALS-1.575" X 2.165" X .328"-IMS15746>
OIL SEALS-1.575" X 2.283 X .354"-CHI15750>
OIL SEALS-1.563" X 2.750" X .500-CHI15761>
OIL SEALS-IMPORT-IMS15771>
OIL SEALS-1.563" X 2.875" X .313"-IMS15773>
OIL SEALS-1.563" X 2.875" X .313"-CHI15773>
OIL SEALS-1.552" X 3.160" X .665"-CHI15788>
OIL SEALS-1.563" X 2.920" X .409"-CHI15790>
1.575" X 2.047" X .276 AUTOMATIC TRANSMISSION FRONT PUMP OIL SEAL-CHI15803 >
OIL SEALS-NAT15805>
OIL SEALS-NAT15805>
1.575" X 2.126" X .217" OIL SEAL - CHI15807>
OIL SEALS-1.575" X 2.126" X .217"-IMS15807>
OIL SEALS-1.575" X 2.165" X .236"-CHI15818>
1.575" X 2.165" X .315" OIL SEAL-CHI15820 >
OIL SEALS-1.575" X 2.165" X .315"-IMS15820>
OIL SEALS-1.575" X 2.205" X .276"-CHI15826>
1.575" X 2.284X.315" OIL SEAL-CHI15835 >
OIL SEALS-1.575" X 2.283" X .315"-OIL SEALS-IMS15835>
OIL SEALS-1.575" X 2.283" X .315"-CHI15836>
1.575" X 2.370" X .315" OIL SEALS -CHI15840 >
1.575" X 2.441" X .315" OIL SEAL -CHI15845 >
Recently Viewed
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. 0-150mm Range, mm/1/2mm.
THRUST BALL BEARING-SNR7204BA>
Browning® 1073337 QD Bushing, 1-3/4 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
NSK Cylindrical Roller Bearings are available with a patented high strength cage design in pressed steel, machined brass or polyamide. Special materials are available for more arduous applications. Cylindrical bearings offer low noise and low heat generation and by virtue of the line contact between rolling elements and raceways, have high radial load capacity which are suited for high-speed applications.
2-1/2" -ID BUSHING-BRW3020X21/2 >
