OIL SEALS
13942 Oil Seals-1.378" X 1.890" X .315"
OIL SEALS-1.378" X 1.890" X .315"-CHI13742>
13943 Oil Seals-1.378" X 1.969" X .275"
OIL SEALS-1.378" X 1.969" X .275"-CHI13943>
13947 Oil Seals-1.378" X 2.047" X .315"
OIL SEALS-1.378" X 2.047" X .315"-IMS13947>
13953 Oil Seals-1.378' X 2.097" X .313"
OIL SEALS-1.378' X 2.097" X .313"-CHI13953>
13956 Oil Seals-type Type J-Flange Radial Shaft / Oil Seal
• Inside Diameter (Shaft Size): 1.375 in (1-3/8")
• Outside Diameter (Housing Bore): 4.577 in
• Width: 0.218 in (approx. 7/32")
• Lip Material: Nitrile Rubber (NBR)
13962 Oil Seals-1.378" X 2.205" X .315"
OIL SEALS-1.378" X 2.205" X .315"-CHI13962>
13972 Oil Seals-1.378" X 2.2520" X .315"
OIL SEALS-1.378" X 2.2520" X .315"-CHI13972>
13972 Oil Seals-1.378" X 2.520" X .315"
OIL SEALS-1.378" X 2.520" X .315"-IMS13972>
13973 Oil Seals-1.378" X 2.559" X .315"
OIL SEALS-1.378" X 2.559" X .315"-IMS13973>
13980 1.378" X 2.835" X .315" Oil Seals
1.378" X 2.835" X .315" OIL SEALS -CHI13980 >
13981 Oil Seals-1.378" X 2.992" X .492"
OIL SEALS-1.378" X 2.992" X .492"-CHI13981>
13985 Oil Seals-1.365" X 1.956" X .438"
OIL SEALS-1.365" X 1.956" X .438"-CHI13985>
13985 Oil Seals-1.365" X 1.956" X .438"
OIL SEALS-1.365" X 1.956" X .438"-IMS13985>
13986 Oil Seals-1.378" X 3.150" X .315"
OIL SEALS-1.378" X 3.150" X .315"-IMS13986>
Recently Viewed
Sealmaster 2-1/4"-ID 2-BOLT TRB PILLOW BLOCKS SEA RPB-204-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Sealmaster 2-15/16"-ID 4-B TRB PILLOW BLOCKS SEA RPB-215-4
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
MORSE® 32310 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
GP® 4033M Standard Length Socket, 1 in, 33 mm Hex Socket, 6 Points
MARXMAN™ 85085 330QI General Purpose Jobber Length Drill Bit, #31 Drill - Wire, 0.12 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
