OIL SEALS
OIL SEALS-1.375" X 2.500" X .328"-IMS13839>
OIL SEALS-1.375" X 2.500" X .328"-CHI13839>
OIL SEALS-1.375" X 2.502" X .374"-CHI13862>
OIL SEALS-1.375" X 2.502".250"-IMS13862>
1.375" X 2.502" X .313" OIL SEAL-CHI13865 >
OIL SEALS-IMPORT OIL SEALS-IMS13870>
1.375" X 2.562X.375" OIL SEAL-CHI13875 >
1.375" X 2.562X.375" OIL SEAL-CHI13876 >
OIL SEALS-1.375" X 2.623" X .313"-CHI13882>
1.375" X 2.686X.500" OIL SEAL-CHI13892 >
OIL SEAL 35X55X10
OIL SEALS-NAT13900>
OIL SEALS-1.375" X 2.716" X .313"-CHI13900>
OIL SEALS-1.375" X 2.716" X .313"-IMS13900>
OIL SEALS-1.378" X 1.614" X .359"-CHI13911>
OIL SEALS-1.375" X 2.812" X .375"-CHI13912>
1.375" X 2.835" X .313" OIL SEALS -CHI13920 >
TCM139224TZ>
1.375" X 2.875" X .313" OIL SEAL - CHI13929>
OIL SEALS-1.378" X 1.890" X .591"-CHI13931>
1.378X1.969" X .276 OIL SEAL-CHI13933 >
1.375" X 3.350" X .469" OIL SEAL-CHI13934 >
1.378X1.850" X .276 OIL SEAL-CHI13938 >
OIL SEALS-1.378" X 1.890" X .315"-IMS13941>
Recently Viewed
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
3.150" X 3.946X.394 OIL SEAL-CHI31511 >
11-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-11-F-1-1/4
11 TOOTH SPROCKETS FOR #60 CHAIN
Browning® 767405 VTBS 200 Normal Duty Pillow Block Ball Bearing, 5/8 in Dia Bore, 2 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 2-7/8 in OAL x 2-9/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
22-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-22-F-1-1/4
22 TOOTH SPROCKETS FOR #60 CHAIN
.500" X 1.124" X .250" OIL SEAL - CHI5069>
