OIL SEALS
OIL SEALS-1.496" X 2.165" X .315"-IMS14720>
1.496X2.126X.276 OIL SEAL-CHI14710 >
1.496X2.086X.315" OIL SEAL-CHI14708 >
OIL SEALS-1.496" X 2.047" X .315"-IMS14706>
OIL SEALS-1.496" X 2.047" X .315"-IMS14705>
OIL SEALS-1.496" X 2.047" X .315"-CHI14705>
1.496X1.969" X .276 OIL SEAL-CHI14703 >
1.469" X 2.374X.375" OIL SEAL-CHI14641 >
TCM145X170X12TC>
1.438" X 2.750" X .313" OIL SEAL - CHI14458>
1.438"X2.686"X.313" OIL SEAL-CHI14423>
OIL SEALS-1.438" X 2.623" X .313"-CHI14404>
1.438" X 2.003" X .312" OIL SEAL - CHI14384>
OIL SEALS-1.438" X 2.502" X .313"-CHI14383>
OIL SEALS-1.400" X 2.484" X .550"-CHI14381>
1.438" X 2.437" X .313" OIL SEAL-CHI14363 >
OIL SEALS-1.438" X 2.437" X .250"-CHI14359>
TCM143263TL>
1.438" X 2.374X.313" OIL SEAL-CHI14282 >
1.438" X 2.750" X .313" OIL SEAL - TCM14273SB>
TCM14263SB>
OIL SEALS-1.438" X 2.250" X .313"-CHI14262>
OIL SEALS-1.438" X 2.250" X .313"-IMS14262>
OIL SEALS-1.438" X 2.250" X .313"-CHI14259>
Recently Viewed
GP® 2034MD Deep Length Socket, 1/2 in, 34 mm Hex Socket, 6 Points
Gates® Power Transmission Hi-Power® II CC270 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 272 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
#8-AWG X #10-HOLE CABLE LUG - ILSCCL810>
Drillco 350E003 3500E Imperial Plain Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
9-RIB POLY-V V-BELT - JAS540J9>
