OIL SEALS
1.688X2.437" X .250" OIL SEAL-CHI16692 >
OIL SEALS-NAT16680>
1.688X2.437" X .313" OIL SEAL-CHI16680 >
OIL SEALS-1.688" X 2.437" X .313"-IMS16679>
1.688X2.437" X .313" OIL SEAL-CHI16679 >
OIL SEALS-1.688" X 2.328" X .531"-IMS16659>
1.688X2.328" X .531" OIL SEAL-CHI16659 >
6.496X7.480" X .591" OIL SEAL-CHI165X190X15HMSA1 >
1.673X2.162X.290" OIL SEAL-CHI16599 >
OIL SEALS-IMPORT SEALS-IMS16575>
1.656X2.686X.313" OIL SEAL-CHI16556 >
OIL SEALS-1.656" X 2.835" X .315"-IMS16555>
1.656X2.835" X .315" OIL SEAL-CHI16555 >
OIL SEALS-1.656" X 2.623" X .375"-IMS16545>
1.656X2.623" X .375" OIL SEAL-CHI16545 >
1.656" X 2.623" X .455" OIL SEALS-TCM165263PTB >
1.654" X 2.441" X .315" OIL SEAL-CHI16523 >
1.654" X 2.520" X .236" OIL SEAL-CHI16522 >
OIL SEALS-1.660" X 2.440" X .594"-OIL SEALS>
1.660" X 2.440" X .594 OIL SEAL-CHI16520 >
1.654" X 2.370" X .315" OIL SEAL-CHI16517 >
1.654" X 2.165" X .315" OIL SEAL-CHI16512 >
1.654" X 2.284X.315" OIL SEAL-CHI16511 >
1.654" X 2.284X.315" OIL SEAL-CHI16509 >
Recently Viewed
Dodge® 117163 Stock Bore Taper Lock Bushing, 1-1/2 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
1/2-LB CAN BRAZING FLUX - FOR37250>
Browning® Classical Gripbelt® 1027960 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.95 in OD, 2.4 in (A)/2.9 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027960 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.95 in OD, 2.4 in (A)/2.9 in (B) Dia Pitch, 13/16 in W Face
Koyo Bearing CYLINDRICAL ROLLER THRUST BEARINGS KOY 81206-TV-PB
Cylindrical roller thrust bearings provide rolling bearing arrangements that accommodate high-dynamic axial loads. The simple geometry of the bearing components allows the use of many design arrangements. As an example, for less demanding applications, it is possible to combine metric series, thrust cylindrical roller and cage assemblies, including the metric series heavy thrust washers (LS, CPR) and even the metric series thin thrust washers (AS, CP). These two thrust washer types are more commonly used with thrust needle roller and cage assemblies. Thrust cylindrical roller and cage assemblies also can be used without bearing thrust washers if the adjacent machine components can be prepared to serve as suitable raceways. Cylindrical roller thrust bearings may be used where the load carrying capability of thrust needle roller and cage assemblies is insufficient. Also, the bearings can accommodate high-dynamic and static axial loads in one direction, but they are not suitable to transmit radial loads.
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62042RSNR >
United Abrasives-SAIT 36605 Open Coated Abrasive Disc Roll, 6 in Dia Disc, 220 Grit, Stearated Aluminum Oxide Abrasive, Paper Backing
