PILLOW BLOCK UNITS
ASPP-204 20-mm-ID Stamped Pillow Block
20-MM-ID STAMPED PILLOW BLOCK UNIT-NTNASPP204 >
72-M-PB 72-mm-OD Pillow Block Flange (set)-mmc72minimum Plain
72-MM-OD PILLOW BLOCK FLANGE (SET)-MMC72MINIMUM PLAIN BORE >
62-PB-ST 62-mm Pillow Block Flanges (set)
62-MM PILLOW BLOCK FLANGES (SET)-IBI62PBST>
60-03-0207 ROYERSFORD 2-7/16"-ID 4-B SPLIT PILLOW BLOCKS
Component Type: Heavy-duty vehicle bolt Primary Applications: Fits multiple Isuzu truck models (including the Isuzu NPR, NPR-HD, NQR, and NRR). System Placements: Used across various critical assemblies, including the clutch system, shock absorbers, rear suspension, and floor remote assemblies.
60-02-0300 3"-ID 2-bolt Split Housing Pillow Block
3"-ID 2-BOLT SPLIT HOUSING PILLOW BLOCK-ROY60020300 >
60-02-0215 2-15/16" 2-b Split Housing Pillow Block
2-15/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020215 >
60-02-0211 ROYERSFORD 2-11/16" 2-B SPLIT HOUSING P/BLOCK
Bearing Type: Babbitt Split Journal Bearing. Shaft Diameter: 2-11/16 inches. Features: Simple, compact unit designed for base loads and continuous operation at moderate speeds. It is split longitudinally to allow easy installation or removal without sliding the bearing off the end of the shaft.
60-02-0208 2-1/2" 2-b Split Housing Pillow Block
2-1/2" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020208 >
60-02-0207 2-7/16" 2-b Split Housing Pillow Block
2-7/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020207 >
60-02-0203 2-3/16" 2-b Split Housing Pillow Block
2-3/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020203 >
60-02-0200 ROYERSFORD 2" 2-BOLT SPLIT HOUSING P/BLOCKS
Bore Size: 2-inch inner diameter designed for shaft mounting. Housing Material: Sturdy cast iron construction featuring a non-expansion design. Bearing Material: High-quality Babbitt metal optimized for continuous operations up to an ambient temperature of 130°F.Physical Dimensions: Features a 7-1/2" overall length (OAL) and a 1-3/4" base-to-center height. Lubrication Layout: Tapped housing to receive standard grease cups or high-pressure style fittings, complete with broached grease grooves. Installation Ease: Built with slotted mounting holes to allow trouble-free alignment and adjustment on structural bases.
60-02-0115 1-15/16" 2-b Split Housing Pillow Block
1-15/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020115 >
60-02-0112 1-3/4" 2-b Split Housing Pillow
1-3/4" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020112 >
60-02-0111 1-11/16" 2-b Split Housing Pillow
1-11/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020111 >
60-02-0107 ROYERSFORD 1-7/16" 2-B SPLIT HOUSING P/BLOCKS
Manufacturer: Royersford Foundry & Machine Company Bore / Shaft Size: 1-7/16 inches Housing Type: 2-bolt split housing mechanical pillow block Application: Industrial mechanical power transmission systems
60-02-0105 ROYERSFORD 1-5/16" 2-B SPLIT HOUSING P/BLOCKS
1-15/16" 2-BOLT SPLIT HOUSING PILLOW BLOCK
60-02-0104 ROYERSFORD 1-1/4" 2-B SPLIT HOUSING P/BLOCKS
The Royersford 60020104 (also written as 60-02-0104) is an industrial split journal pillow block bearing manufactured by the Royersford Foundry and Machine Company. It features a 1-1/4 inch bore and a babbitt-lined split housing. These parts are commonly sourced as new surplus or replacement parts for legacy industrial equipment.
60-02-0103 ROYERSFORD 1-3/16" 2-B SPLIT HOUSING P/BLOCKS
AI Mode Conversation: Royersford 60020104royersford 60020104 (also formatted as 60-02-0104) is a specific industrial part number for a split journal bearing pillow block manufactured by the Royersford Foundry & Machine Company. Product Specifications Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
60-02-0100 ROYERSFORD 1" 2-BOLT SPLIT HOUSING P/BLOCKS
Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
52-PB-ST 52-mm Pillow Block Flanges (set)
52-MM PILLOW BLOCK FLANGES (SET)-IBI52PBST>
47-PB-ST 47-mm-OD Pillow Block Flange (set)
47-MM-OD PILLOW BLOCK FLANGE (SET)-IBI47PBST>
Recently Viewed
Law® LW3 Series Foam Lined Safety Glasses Soft Secure TPR Nose Piece TPR Temple Inserts Lightweight 24.5 grams These dielectric safety glasses contain no metal This lightweight and fashionable wrap-around lens design offers an excellent orbital seal and a higher level of protection from side impacts due to its greater coverage area. TPR temple inserts that enhance grip and comfort are included on all styles. This series is a dielectric option, meaning the eyewear has no metal pieces. It's lightweight design makes the LW3 a good choice for long term and comfortable wear. Choose the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
.500" X 1.375" X .250" OIL SEAL-CHI5150 >
RT1 Series Foam Lined Safety Glasses Adjustable Ratcheting Temples Interchangeable Head Band Included Dielectric with No Metal Pieces The RT1 series features interchangeable 3-position ratcheting bayonet temples and an adjustable elastic headband with each pair. A unique feature of the headband with hook and loop closure is the ability to adjust with one hand while wearing. The RT1 also features full-length, non-slip TPR temple sleeves for comfort and grip. A closed cell foam seal provides optimum protection from small particles and debris. The lightweight nylon frame and polycarbonate wrap-around lens design provides greater side impact protection. This foam-lined sealed eyewear could be used as motorcycle safety glasses! If you are looking for the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
.500" X 1.250" X .250" OIL SEAL-CHI5133 >
SCOTSEALS-5.250" X 7.376" X .945"-CHI52658>
Mcr safety Ninja® gloves are engineered to provide the highest level of innovation. Each of the offerings in the Ninja® series include a unique shell and polymer combination incorporating the latest in hand protection technology. Our Ninja® glove line offers the greatest assortment of dexterity, sense of touch, and protection. The Ninja® ice fully coated gloves features a 15-ga black nylon shell with a 7-ga acrylic terry interior liner. Black HPT fully coated glove.
