PILLOW BLOCK UNITS
4-3/16" SPLIT PILLOW BLOCK HOUSING
3-15/16" SPLIT PILLOW BLOCK HOUSING-BCCSAF522 >
3-15/16" SPLIT PILLOW BLOCK HOUSING-NTNSAF522 >
3-7/16" SPLIT PILLOW BLOCK HOUSING - BCCSAF520>
3-3/16" SPLIT PILLOW BLOCK HOUSING
2-15/16" 2-H PILLOW BLOCK HOUSINGS-BCCSAF517 >
2-15/16" 2-H PILLOW BLOCK HOUSINGS-SKFSAF517>
2-7/16" SPLIT PILLOW BLOCK HOUSING-BCCSAF515 >
2-7/16" SPLIT PILLOW BLOCK HOUSING-SNRSAF515>
2-3/16" SPLIT PILLOW BLOCK HOUSING-BCCSAF513 >
2-3/16" SPLIT PILLOW BLOCK HOUSING-NTNSAF513 >
1" -ID ECC COLLAR PILLOW BLOCK UNIT-IBISAPB20516 >
S-SPS-219 1-1/8" S/s Pillow Block
1-1/8" S/S PILLOW BLOCK UNIT-BRWSPSS219>
15/16"-ID 2-BOLT PILLOW BLOCK UNIT-SEAS2116M15>
S1-1-15/16" SPLIT TAPER BUSHING, 1-15/16" BORE, 1/2" X 1/4" KEYWAY-BRWS1115/16 >
RSAO-2-7/16 2-7/16"-ID 300 Pillow Block
2-7/16"-ID 300 PILLOW BLOCK UNIT - FAFRSAO27/16>
2-3/16" -ID HEAVY DUTY PILLOW BLOCK UNIT-FAFRSAO23/16 >
RSAO-2-11/16 2-11/16"-ID 300 Pillow Block
2-11/16"-ID 300 PILLOW BLOCK UNITS-FAFRSAO211/16>
1-15/16" -ID HEAVY DUTY PILLOW BLOCK-FAFRSA115/16 >
RPB-5/8 light-duty, 2-bolt pillow block ball bearing unit.
• Bore / Shaft Diameter: 5/8 inch (15.875 mm)
• Housing Construction: 2-Bolt Pillow Block
• Base to Centerline Height: 1.000 inch (25.4 mm)
• Total Length: 4-1/8 inches (104.8 mm)
• Locking Mechanism: Eccentric locking collar
• Bearing Insert: RA010RRB (typically paired with this unit)
• Load Rating: 2,380 lbf dynamic / 1,070 lbf static
3-7/16"-ID 2-BOLT PILLOW BLOCKS-SEARPB3072>
3-3/16"-ID 2-BOLT PILLOW BLOCKS-SEARPB3032>
2-3/4"-ID 2-BOLT PILLOW BLOCKS-SEARPB2122>
2-11/16"-ID 2-BOLT PILLOW BLOCKS-SEARPB2112>
Recently Viewed
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
3.750" X 5.251" X .438" OIL SEAL-CHI37574 >
VANILLA ODOR NEUTRALIZER + SPRAY-MIS20720 >
SPIN-ON FILTER KIT-TUT1200KTF7018 >
Square Dâ„¢ 8910DPA33V14 3-Phase Electromechanical Type DPA Definite Purpose Contactor, 24 V AC V Coil, 30 A, 3NO Contact, 3 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 24 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
1.250" X 2.125" X .256 OIL SEAL-CHI534955 >
