4-BOLT FLANGE UNITS
NAN-F-201-8 1/2" -ID 4-bolt Flange
1/2" -ID 4-BOLT FLANGE UNIT-FYHNANF2018 >
MSF-47 SEALMASTER Cast Iron 4-Bolt Flange Setscrew Lock Medium Duty Flange Unit
4-Bolt Flange Type
Cast Iron Housing Material
Black Oxide Bearing Insert Coating
Set Screw Locking Type
MSF-39 SEALMASTER Cast Iron 4-Bolt Flange Setscrew Lock Medium Duty Flange Unit
4-Bolt Flange Type
Cast Iron Housing Material
Black Oxide Bearing Insert Coating
Set Screw Locking Type
MS-F-27 SEALMASTER POWER TRANSMISSION PRODUCTS
1-11/16"-ID 4-BOLT BB FLANGE UNIT-SEAMSF27>
MFC-56 SEALMASTER POWER TRANSMISSION PRODUCTS
3-1/2"-ID 4-BOLT CARTRIDGE FLANGE UNIT - SEAMFC56>
MFC-32 SEALMASTER is a 2" bore 4-bolt piloted flange bearing unit from the Gold Line. It features a cast iron housing, 52100 bearing steel insert with black oxide coating, set screw locking, and a felt-labyrinth seal. Pre-lubricated for general industrial
Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew locking with diamond faceted setscrews
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
MFC-16 SEALMASTER old Line Ball Bearing
Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew locking with diamond faceted setscrews
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Sealmaster® exclusive lock pin & dimple for direct lubrication and anti-rotation
JYR-P-2315 a heavy-duty, 3-15/16 inch shaft diameter piloted flange mounted roller bearing
• Shaft/Bore Diameter: 3-15/16 inches
• Total Assembly Weight: 41.0 lbs
• Overall Diameter (A): 10-7/8 inches
• Bolt Circle Diameter (B): 9-3/8 inches
• Pilot O.D. (H): 8.125 inches (Tolerance +0.000" / -0.005")
• Housing Thickness (C): 1 inch
• Pilot Length (D): 2 inches
JYR-P-2308 3-1/2"-ID 4-bolt Flange Unit - Jnejyrp2308
3-1/2"-ID 4-BOLT FLANGE UNIT - JNEJYRP2308
JYR-P-2303 2-13/16"-ID 4-bolt Flange
2-13/16"-ID 4-BOLT FLANGE UNIT - JNEJYRP2303>
JYR-P-2215 a heavy-duty, 2-15/16 inch shaft diameter piloted flange mounted roller bearing
• Shaft/Bore Diameter: 2-15/16 inches
• Total Assembly Weight: 19.5 lbs
• Overall Diameter (A): 8-3/4 inches
• Bolt Circle Diameter (B.C.D.): 7-1/2 inches
• Pilot Outer Diameter (H): 6.375 inches (Tolerance +0.000" / -0.005")
• Housing Thickness (C): 13/16 inch
• Pilot Length (D): 1-1/4 inches
• Bolt Hole Size (K): 25/32 inch (for 5/8" diameter bolts)
JYR-P-2207 2-7/16"-ID 4-bolt Flange
2-7/16"-ID 4-BOLT FLANGE UNIT - JNEJYRP2207>
JYR-P-2203 a 2-3/16 inch bore, 4-bolt piloted round flange mounted spherical roller bearing unit
2-3/16"-ID 4-BOLT SPH FLANGE UNITS-JNEJYRP2203>
JYR-P-2200 JONES BEARINGS a 2-inch bore, 4-bolt piloted round flange mounted spherical roller bearing unit
• Shaft Bore Diameter: 2 inches
• Housing Type: JYRP-2000 Series Piloted Flange Block
• Bearing Insert: Double-row self-aligning spherical roller bearing
• Unit Weight: 8.15 lbs
• Housing Dimensions:
• Total Outer Diameter (A): 6-3/8 inches
• Pilot Diameter (B): 5-3/8 inches (Fits into a 5.375" machined frame bore)
• Flange Thickness (C): 5/8 inch
• Pilot Depth (D): 7/8 inch
• Total Profile Depth (F): 3-5/32 inches
• Bolt Circle Diameter (H): 4.500 inches
• Bolt Hole Diameter (G): 9/16 inch (Accommodates 1/2" mounting bolts)
JYR-P-2115 a 1-15/16 inch bore, 4-bolt piloted round flange mounted spherical roller bearing unit manufactured by the Jones Bearing Company.
• Shaft Bore Diameter: 1-15/16 inches
• Housing Type: JYRP-2000 Series Piloted Round Flange Block
• Bearing Insert: Heavy-duty, self-aligning spherical roller bearing element
• Unit Weight: 8.15 lbs (some engineering sub-prints list it up to 8.5 lbs)
• Housing Dimensions:
• Total Outer Diameter (A): 6-3/8 inches
• Pilot Hub Diameter (B): 5-3/8 inches (Machined to a tolerance of +0.000 / -0.005 inches)
• Flange Plate Thickness (C): 5/8 inch
• Pilot Backing Depth (D): 7/8 inch
• Total Profile Projection (F): 3-5/32 inches
• Bolt Circle Diameter (H): 4.500 inches
• Bolt Hole Diameter (G): 9/16 inch (Designed for four 7/16-inch or 1/2-inch mounting bolts)
• Standard Configuration: Built as a Non-Expansion (NXP) fixed unit by default.
Direct Brand Interchange Cross-References
The JYRP2115 features standardized dimensions across industrial brands and can directly cross-reference or replace the following models:
• SKF: FYRP 1-15/16
• Dodge: FC-S2-115R
• Link-Belt / Rexnord: FCB22431H
• Browning / Regal Rexnord: ZBR115 or ZBR2115
• Timken / Blue Brute: QACW10A115ST
Sourcing Options
• Wholesale Distributors: Factory-new units can be sourced through industrial suppliers cataloging the JYRP-2000 line, such as Jamieson Equipment Co..
• Expansion Variations: If your application experiences extreme thermal shaft expansion and requires a floating configuration, you should request the unit with the alternative suffix: JYRP2115EXP.
Are you substituting this 1-15/16" piloted flange for a standard unpiloted round flange (where you need to confirm your frame's machined cutout diameter), or are you ordering parts to rebuild an existing fixed and expansion shaft assembly?
•
Frank Callahan Co., Inc.
JYRP2115
Phone: (205) 663-3002. FULLY SELF-ALIGNING 2. FIXED AND EXPANSION UNITS 3. APPROX. WEIGHT : 8.5 LBS 4. ALL DRAWING DIMENSIONS ARE ...
•
Jones Bearing
JA-2000 Series Pillow Blocks (2-Bolt)
Standard configuration: Non-expansion (NXP); spec
JYR-P-2112 a 1-3/4 inch bore, 4-bolt piloted round flange mounted spherical roller bearing unit
• Shaft Bore Diameter: 1-3/4 inches
• Housing Type: JYRP-2000 Series Piloted Round Flange
• Internal Bearing: Self-aligning, double-row spherical roller bearing element
• Unit Weight: 7.65 lbs
• Housing Dimensions:
• Total Outer Diameter (A): 6-1/8 inches
• Pilot Hub Diameter (B): 5-1/8 inches (Fits into a 5.125" frame cutout)
• Flange Plate Thickness (C): 5/8 inch
• Pilot Hub Depth (D): 7/8 inch
• Total Profile Projection (F): 3-5/32 inches
• Bolt Circle Diameter (H): 4.250 inches
• Bolt Hole Diameter (L): 7/16 inch (Designed for 3/8" or 7/16" mounting hardware)
JYR-P-2108a 1-1/2 inch bore, 4-bolt piloted round flange mounted spherical roller bearing unit manufactured by the Jones Bearing Company.
• Shaft Bore Diameter: 1-1/2 inches
• Housing Type: JYRP-2000 Series Piloted Round Flange Block
• Internal Bearing: Fully self-aligning double-row spherical roller bearing
• Unit Weight: 6.30 lbs
• Housing Dimensions:
• Total Outer Diameter (A): 5-1/4 inches
• Pilot Hub Diameter (B): 4-3/8 inches
• Flange Plate Thickness (C): 23/32 inch
• Pilot Backing Depth (D): 3/4 inch
• Total Profile Projection (F): 2-57/64 inches
• Bolt Circle Diameter (H): 3.625 inches
• Bolt Hole Diameter (K): 25/64 inch (Designed for 3/8 inch mounting
JYR-2203 a 2-3/16 inch bore, 4-bolt circle flange mounted spherical roller bearing unit manufactured by the Jones Bearing Company. Part of the J-2000 heavy-duty series, the JYR style utilizes a round, circular flange housing rather than a square pattern t
• Shaft Bore Diameter: 2-3/16 inches
• Housing Type: JYR-2000 Series Circular Flange Block
• Bearing Insert: Self-aligning spherical roller bearing
• Total Weight: 13.5 lbs
• Bolt Pattern: 4 holes accommodating 5/8 inch mounting bolts
Recently Viewed
DOUBLE SEALED SPHERICAL PLAIN BEARING 25X42X20-GULGE25ES2RS >
2-VP-062-1-1/4 2-grv Variable Pitch Sheaves
2-GRV VARIABLE PITCH SHEAVES -IDC2VP06211/4 >
BAR-RATCHETING WINCH BARS
DOUBLE OPEN FACE BALL BEARINGS-FAF9114K>
2-7/16" -ID 4-BOLT FLANGE UNIT-BRWSFB1000EX27/16 >
Browning® 1212083 Minimum Plain Bore Spur Gear, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 60 Teeth, 6 in Dia Pitch, 7/8 in Dia Bore, Cast Iron
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
