THREE PHASE MOTORS
30-HP, TEFC, 3-PH, 208-230/460-V, 1800-RPM, 286-T MOTOR - USMH30P2D >
30-HP, TEFC, 3-PH, 208-230/460-V, 3600-RPM, 286-TS MOTOR - USMH30P1DS >
20-HP, TEFC, 3-PH, 208-230/460-V, 1800-RPM, 256-T MOTOR - USMH20P2D >
15-HP, TEFC, 3-PH, 208-230/460-V, 1200-RPM, 185-T MOTOR - USMH15P3D >
15-HP, TEFC, 3-PH, 208-230/460-V, 1800-RPM, 254-T MOTOR - USMH15P2D >
10-HP, TEFC, 3-PH, 208-230/460-V, 1800-RPM, 215-TC MOTOR - USMH10P2DC >
10-HP, TEFC, 3-PH, 208-230/460-V, 1800-RPM, 215-T MOTOR - USMH10P2D >
2-HP, ODP, 3-PH, 208-230/460-V, 3600-RPM, 56-J MOTOR - USMEE733 >
5-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 184-T MOTOR - USMD5P2D >
3-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 145-T MOTOR - USMD3P1D >
3-HP, ODP, 3-PH, 208-230/460-V, 3600-RPM, 145-T MOTOR - USMD3P1D >
2-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 145-T MOTOR - USMD2P2D >
15-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 254-T MOTOR - USMD15P2D >
1-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 56-H MOTOR -USMD1S2AH9 >
1-HP, ODP, 3-PH, 208-230/460-V, 3600-RPM, 56-C - USMD1S1ACR >
1-HP, ODP, 3-PH, 208-230/460-V, 1800-RPM, 143-T MOTOR - USMD1P2D >
1-HP, TEFC, 3-PH, 208-230/460-V, 1200-RPM, 145-T - USMBR1S3A3 >
Recently Viewed
Chicago Pneumatic CP-9887 Pneumatic Drill, 3/8 in Chuck, 1/2 hp, 25.784 to 27 cfm Air Flow, 8 in OAL
Chicago Pneumatic T025376 Pneumatic Drill, 3/8 in Chuck, 1/2 hp, 25.784 to 27 cfm Air Flow, 8 in OAL
Dichtomatik N70324 O-Ring, 324 Dash Number, 1.35 in ID x 1.77 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Drillco 300A124 Type C Heavy Duty Stub Length Screw Machine Length Drill, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
TB Wood's® L225118 Straight L-Jaw Coupling Hub, L225 Coupling, 1-1/8 in Bore, 2.19 in, 4-1/4 in Hub, Cast Iron
Browning® 767897 VF4E 200 Non-Expansion Normal Duty Round/Straight Bore Ball Bearing Unit, 15/16 in Dia Bore, 2-3/4 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 3-3/4 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028117 BK Series Type 2 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 3.55 in OD, 3 in (A)/3-1/2 in (B) Dia Pitch, 7/8 in W Face
