V-BELTS COGGED BANDED AX-BX-CX-DX
3 GROOVE BANDED BX-68 V-BELT OUTSIDE CIRCUMFERENCE 71"-PIXBX68/03 >
4-GRV BANDED BX-68 V-BELT OUTSIDE CIRCUMFERENCE 71"-PIXBX68/04 >
2 GROOVE BANDED BX-71 V-BELT OUTSIDE CIRCUMFERENCE 74-PIXBX71/02 >
6-GRV BANDED BX-75 V-BELT OUTSIDE CIRCUMFERENCE 78-PIXBX75/06 >
2 GROOVE BANDED BX-97 V-BELTOUTSIDE CIRCUMFERENCE 100"-PIXBX97/02 >
12-GROOVE BANDED BX-98 V-BELT 101"-OD - PIXBX98/12 >
NOTCHED GRIP V-BELTS-PIXCC81>
NOTCHED GRIP V-BELT-PIXCX150>
NOTCHED GRIP V-BELT-JASCX180>
NOTCHED GRIP V-BELTS-JASCX75>
4-GRV BANDED CX-81 V-BELT OUTSIDE CIRCUMFERENCE 85"-PIXCX81/04 >
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 47.5" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3VX475 >
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 40" OUTSIDE LENGTH, 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3VX400 >
JASON AX76 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 78" OUTSIDE LENGTH
AX SECTION COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16 THICK. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZED HEAT BUILD-UP. FEATURES BIAS CUT COVER STOCK THAT PROVIDES LATERAL STABILITY ACROSS THE WIDTH OF THE BELT WHILE ALSO ALLOWING AXIAL FLEXIBILITY.
-JASAX76>
JASON BX-39 COGGED CLASSICAL V-BELTS; 21/32" TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 42" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBX39>
PIX BX-140 IS A COGGED, CLASSICAL V-BELT 143" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX140>
2-GRV BANDED BX-158 V-BELTS-DAYRBX1582>
4-GRV BANDED BX-66 V-BELTS-DAYRBC664>
Recently Viewed
ISOSTATIC™ Oilube® 102625 Round Bore Cored Bar, 1 in ID x 1-5/8 in OD, 6-1/2 in OAL, SAE 841 Powdered Metal/Oil Impregnated Bronze
HK-1210 INA BEARING metric-series drawn cup needle roller bearing with open ends.
Bore Diameter Under Rollers (\(F_{w}\)) 12 mm
Outside Diameter (D) 16 mm
Overall Shell Width (C) 10 mm
Basic Dynamic Radial Load Capacity (\(C_{r}\)) 4,950 N (~1,110 lbf)
Basic Static Radial Load Capacity (\(C_{0r}\)) 6,200 N (~1,390 lbf)
ISOSTATIC™ Oilube® 401463 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 1-3/4 in OD, 1-1/2 in W
disposable filters are designed for protection of furnace and central air units in residential and light commercial applications. Construction of both models is identical except for the media retainer. The EZ Flow® features a metal media retainer on the downstream side while the EZ Flow® II has no media retainer. Instead, the media itself is adhered directly to the frame for non-metallic applications.
52-MM PILLOW BLOCK FLANGES (SET)-IBI52PBST>
2" -ID QUICK DISCONNECT SK-STYLE BUSHING
