V-BELTS COGGED AX-BX-CX-DX
AX-36 PIX BELTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 38"-PIXAX36 >
AX-36 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 38"-JASAX36 >
AX-35 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 37"-JASAX35 >
AX-34 PIX BELTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 36"-PIXAX34 >
AX-34 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 36"-JASAX34 >
AX-33 JASON AX33 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 35" OUTSIDE LENGTH
MADE OF CHLOROPRENE BELT IS 35"L X .05" W. COGGED RAW EDGE V-BELTS ARE DESIGNATED BY A LETTER INDICATING BELT CROSS-SECTION, FOLLOWED BY "X" WHICH SIGNIFIES COGGED, RAW EDGE CONSTRUCTION THAT HAS GREATER POWER CAPACITY THAN STANDARD WRAPPED BELTS.
"-JASAX33 >
AX-32 JASON AX32 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK
CLASSICAL DYNAMIC-X V-BELT AX, 1/2" TOP WIDTH, 34 IN NOMINAL OUTSIDE LENGTH, COGGED INSIDE LENGTH PLUS 2 "ES EQUALS OUTSIDE LENGTH
JASAX32 >
AX-31 PIX BELTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 33"-PIXAX31 >
AX-31 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 33"-JASAX31 >
AX-30 JASON AX30 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK
OIL AND HEAT RESISTANT. STATIC DISSIPATING. 1/2 " TOP WIDTH, 5/16-" THICK. RAW EDGE, COGGED MULTIPLE V-BELTS ARE LISTED BY INDUSTRY NUMBER IN THE FIRST LETTER INICATES BELT SECTION, THE X IS A COGGED CONSTRUCTION AND THE NUMBER IS BELT INSIDE LENGTH IN "ES. INSIDE LENGTH PLUS 2 "ES EQUALS OUTSIDE LENGTH
-JASAX30 >
AX-28 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 30"-JASAX28 >
AX-27 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 29"-JASAX27 >
AX-26 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 28"-JASAX26 >
Recently Viewed
12-C DOMINATOR 17" PRY BAR - MAY12C>
13 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4013X1/2 >
GP® 1014U Standard Length Socket, 3/8 in Universal Drive, 7/16 in, 6 Points
Irwin® Speedbor® 88811 2000 Standard Length Spade Bit, 11/16 in Dia, 6 in OAL, 5 in L Flute Flat Flute, 1/4 in Shank
No matter what wood-boring project you face, IRWIN makes a drill bit to do the job better. Whether the job requires quick, clean holes or precise finish work, there's an IRWIN bit for it. Our mark of quality is stamped on the shank of our full range of bits for every application and every need.
12 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4012X3/4 >
GP® 1018U Standard Length Socket, 3/8 in Universal Drive, 9/16 in, 6 Points
