V-BELTS A-B-C-D-E
"PIX A73K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 75"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA73K>
"PIX A81K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 83"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA81K>
"PIX A83K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 85"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA83K>
"PIX A94K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 96" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA94K>
"PIX A98K--TOP WIDTH- 0.5"", 5/16"" THICKNESS, 100"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA98K>
A-100 BROWNING 102.2″ Outside Diameter Type A Super Grip Belt
Neoprene wrapped construction for durability and smooth operation
Up to 95% efficiency under proper operating conditions
Approximate outside length: 102 inches
Standard A-section dimensions (1/2" top width, ~5/16" thickness)
Oil, heat, and abrasion resistant materials
Recently Viewed
GP® 2346D Thin Wall Socket, 1/2 in, 3/4 x 13/16 in Hex Socket, 6 Points
Klein® Cushion-Grip Torx® 19555 Screwdriver Set, 5 Pieces, Steel, Polished Chrome
This five piece Cushion-Grip™ screwdriver set features TORX® tip drivers to transfer more torque to the work and cut slippage to save your fasteners. Each handle end is color coded for quick and easy identification. The premium chrome-plated shanks provide a smooth feel and resist corrosion.
BrassCraft® G2R10X C1 1/4 Turn Water Supply Stop, 3/8 in Nominal, FNPT x Compression, 125 psi, Brass Body, Polished Chrome, Domestic
BrassCraft 3/8 in FIP Inlet x 3/8 in OD Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
Wilton® 10404S46 Pipe Jaw, For Use With 10404 Combination Pipe and Bench Vise
300-W INSIDE FROST MOGUL BASE BULB-BUL300IF >
GP® 2392D Thin Wall Socket, 1/2 in, 19 x 21 mm Hex Socket, 6 Points
