V-BELTS A-B-C-D-E
V-BELTS-BRWB64>
Wrapped construction - Provides smooth quiet operation. Single fabric design allows greater flexibility. Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts.
Close Belt tolerance - Browning Belts offer the "Code 1" Match belt system on all classical and "358" Belts, allowing easy selection of just one match number for each belt size. This ensures tighter than RMA standards.
High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt.
Outside Length: 66"
Pitch Length: 64.8"
Belt Section: B
KEVLAR V-BELTS-PIXB62K>
V-BELTS-BRWB62>
V-BELTOUTSIDE CIRCUMFERENCE >64-JASB61 >
V-BELTS-BRWB61>
V-BELTS-B59>
V-BELTS-BRWB58>
V-BELTS-BRWB56>
V-BELTOUTSIDE CIRCUMFERENCE >58-JASB55 >
V-BELTOUTSIDE CIRCUMFERENCE >57"-JASB54 >
V-BELTS-BRWB54>
V-BELTOUTSIDE CIRCUMFERENCE >56-JASB53 >
V-BELTS-BRWA53>
V-BELTOUTSIDE CIRCUMFERENCE >55"-JASB52 >
Wrapped construction - Provides smooth quiet operation. Single fabric design allows greater flexibility. Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts.
Close Belt tolerance - Browning Belts offer the "Code 1" Match belt system on all classical and "358" Belts, allowing easy selection of just one match number for each belt size. This ensures tighter than RMA standards.
High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt.
Outside Length: 55"
Pitch Length: 53.8"
Belt Section: B
KEVLAR V-BELTS-PIXB512K>
KEVLAR V-BELTS-PIXB51K>
V-BELTS-BRWB51>
V-BELTOUTSIDE CIRCUMFERENCE >53-JASB50 >
V-BELTS-BRWB49>
51" KEVLAR V-BELTS-PIXB48K>
V-BELTS-BRWB48>V
KEVLAR V-BELTS-PIXB47K>
Recently Viewed
PIX A-103 IS A CLASSICAL V-BELT, 105" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA103 >
V-BELTS-BRWA81>
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
PIX A-95 IS A CLASSICAL V-BELT 97" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA95 >
V-BELTS-BRWB42>
PIX A-46 IS A CLASSICAL V-BELT 48" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA46 >
