title-custom

JASON 800-H-075 1/2-"G (H) PITCH STANDARD TIMING BELT. 80" LENGTH X .75" WIDTH

TIMING BELTS

$50.35

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
- JAS800H075>

JASON 800-H-200 1/2-"G (H) PITCH STANDARD TIMING BELT. 80" LENGTH X 2" WIDTH

TIMING BELTS

$128.55

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS800H200 >

JASON 850-H-200 1/2-"G (H) PITCH STANDARD TIMING BELT. 85" LENGTH X 2" WIDTH

TIMING BELTS

$133.15

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS850H200 >

JASON 900-L-050 TIMING BELT, 240 TEETH, 3/8" PITCH 1/2 " WIDTH 90" CIRCUMFERENCE

TIMING BELTS

$38.85

BELT IS MADE OF FLEXIBLE NEOPRENE BACKING, FIBERGLASS TENSILE CORD AS REINFORCEMENT. THESE BELTS OFF A RELIABLE, ECONOMICAL AND TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES. THE BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST.
JAS900L050>

JASON 960-8-M-12 8-MM PITCH X 12-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH

TIMING BELTS

$27.35

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS9608M12 >

JASON 960-8-M-20 8-MM PITCH X 20-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH

TIMING BELTS

$43.45

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS9608M20>

JASON 960-8-M-30 8-MM PITCH X 30-MM TOP WIDTH X 960-MM OUTSIDE CIRCUMFERANCE; 120 TEETH

TIMING BELTS

$61.85

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS9608M30 >

JASON 966-14-M-55 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 966-MM PITCH LENGTH, 14-MM TOOTH PITCH, 55-MM WIDE

TIMING BELTS

$278.05

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
- JAS96614M55>

JASON D1400H300 H-PITCH X 100" DBL/TIMING BELTS

TIMING BELTS

$915.15

POSITIVE DRIVE TIMING BELT. DUAL SIDED TIMING BELT, H SERIES (1/2" PITCH) 280 TEETH, 140" PITCH LENGTH, 3 "ES WIDE-
JASD1400H300>

JASON D24008M30 8-MM-PITCH DBL/TIMING BELTS

TIMING BELTS

$227.45

GEARBELT, DOUBLE 255 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JASD24008M30 >

JASON D5100L050 L-PITCH X 51" DBL/TIMING BELTS

TIMING BELTS

$66.45

GEARBELT, DOUBLE 136 TEETH, 30MM WIDE, 8 MM PITCH, 2400-MM LONG. TIMING BELTS ARE CLEANER, LUBE-FREE, QUIETER AND LOWER IN COST. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
ASD510L050 >

JASON HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2450 MM LENGTH,

TIMING BELTS

$733.45

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
JAS245014M85 >