TIMING BELTS
JASON 2360H200 HEAVY "H" STANDARD TIMING BELT, CHLOROPRENE, 1/2" PITCH, 236" LENGTH, 2.00" WIDE
THIS BELT IS MADE OF FIBERGLASS TENSILE CORD WHICH GIVES HIGH DIMENSIONAL STABILITY. THE CHLOROPRENE BELT BODY MAKES THE BELT RESISTANCE TO OIL, HEAT AND OZONE, AND HIGH TOOTH SHEAR RESISTANCE. THE BELT HAS A NYLON TOOTH COVER
-JAS2360H200 >
JASON 255L100 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 25.5" PITCH LENGTH, 0.14" HEIGHT 0.375" PTICH, 1" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS255L100 >
JASON 260XL037 TIMING BELT 10MM WIDTH, 75 TEETH COGGED RUBBER SYNCHRONOUS CLOSED LOOP SMALL GEAR DRIVES
HIGH QUALITY AND DURABLE BELT MADE FROM HIGH QUALITY RUBBER WITH FIBERGLASS REINFORCEMENT. THE BELTS HAVE PRECISE POWER TRANSMISSION WITH A 5 MM PITCH AND TRAPEZOIDAL TOOTH PROFILE. THEY OFFER LOW NOISE AND SMOOTH OPERATION.
JAS260XL037 >
JASON 270L050 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 27.0" PITCH LENGTH, .14" HEIGHT 0.375" PTICH, 0.50" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS270L050 >
JASON 2800-8-M-30 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2800 MM LENGTH, 8 MM TOOTH PITCH, 30 MM WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE NYLON TOOTH COVER, MADE OF CHLOROPRENE
- JAS28008M30>
JASON 280014M55 THE NEXT GENERATION SYNCHRONOUS PLATINUM BELT, HNBR, 2800 MM PITCH LENGTH, 14MM TOOTH PITCH, 55MM WIDE
RPC TOOTH PROFILE, REDUCED BELT AND PULLEY WIDTH PRODUCT LESS NOISE, REDUCES DRIVE WEIGHT, BEARING LOAD AND COST. GREATER LENGTH RANGE, THE HNBR CAUSES HIGH RESISANCE TO PETROLEUM OILS AND SOLVENTS MADE OF TENSILE CORD.
-JAS280014M55 >
JASON 280H075 HEAVY "H" STANDARD TIMING BELT, CHLOROPRENE, 1/2" PITCH, 28" LENGTH, 0.75" WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS270L100 >
JASON 280H075 HEAVY "H" STANDARD TIMING BELT, CHLOROPRENE, 1/2" PITCH, 28" LENGTH, 0.75" WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
JAS280H075 >
JASON 280J200 HEAVY "H" STANDARD TIMING BELT, CHLOROPRENE, 1/2" PITCH, 28" LENGTH, 2" WIDE
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS280H200 >
JASON 285L100 TRAPEZOIDAL TOOTH PROFILE BELT, LIGHT, 28.5" PITCH LENGTH, 0 .14" HEIGHT 0.375" PITCH, 1" WIDE
UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
JAS285L100 >
JASON 3003M06 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE 1.417" TOP WIIDTH, 300 MM LENGTH 3MM TOOTH PITCH, 06 MM WIDE
A HARD WEARING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES. -JAS3003M06 >
JASON 300H100 H-PITCH X 30" LENGTH , I" TOP WIDTH TIMING BELT/GEARBELT
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JAS300H100 >
JASON 300H150 SYNCHRONOUS BELT, 1/2 " PITCH; 30" PITCH LENGTH; 1-1/2 BELT WIDTH.
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL H-PITCHX30" TIMING BELT-JAS300H150 >
JASON 300H200 SYNCHRONOUS BELT, 1/2 " PITCH; 30" PITCH LENGTH; 2 BELT WIDTH.
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS300H200 >
JASON 300L050 SYNCHRONOUS BELT, 3/8 " PITCH; 30" PITCH LENGTH; 1/2" BELT WIDTH
STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS300L050 >
JASON 300L100 SYNCHRONOUS BELT, 3/8 " PITCH; 30" PITCH LENGTH; 1" BELT WIDTH
STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS300L100 >
JASON 320H075 SYNCHRONOUS BELT, 1/2 " PITCH; 32" PITCH LENGTH; 3/4" BELT WIDTH.
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS320H075 >
JASON 330H100 SYNCHRONOUS BELT, 1/2 " PITCH; 30" PITCH LENGTH; 1" BELT WIDTH.
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER T0 THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS320H100 >
JASON 345L150 POSITIVE DRIVE TIMING BELT, L SERIES 3/8" PITCH, 92 TEETH 34.50" PITCH LENGTH 1-1/2" WIDE
STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L150 >
JASON 360H100 SYNCHRONOUS BELT, 1/2 " PITCH; 36" PITCH LENGTH; 1" BELT WIDTH. 72 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H100 >
JASON 360H200 SYNCHRONOUS BELT, 1/2 " PITCH; 36" PITCH LENGTH;2" BELT WIDTH. 72 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >
JASON 367L050 3/8-" L PITCH STANDARD TIMING BELT. 36.7 " PITCH LENGTH, 98 TEETH 12.7 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS367L050 >
JASON 3755M15 5MM PITCH, 3.8MM HEIGHT, 15MM WIDTH, 375MM LENGTH, TEETH;75
A HARD WEATING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES.
-JAS3755M15 >
JASON 3843M09 HDT TIMING BELT 384-MM PITCH LENGTH
BELT IS 384MM PITCH LENGTH, 128 TEETH, PITCH:3MM WIDTH;09, TOTAL HEIGHT 240MM, TOOTH HEIGHT:1.22 MM
-JAS3843M09 >
Recently Viewed
2-1/2" STEEL LOCKING SNAP HOOKS-FRE135>
8" X 2.5" BLACK TAMPICO COUNTER DUSTER - DQB08806 >
GEARWRENCH offers a wide range of pry bars for almost every application. The aligning and rolling head pry bars are manufactured from high alloy steel for superior strength and durability. They are ideal for prying, positioning, aligning, and lifting applications. Use the tapered end for aligning applications. The curved blade of the aligning pry bars provides extra leverage, while the rolling head provides maximum leverage. Available in sets and individually, these pry bars can handle just about any prying or aligning application.
48 T-5 3-LAMP WET LOCATION-CRSWL4WA354UNIV >
McGill® 0004200000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 2-5/8 in ID x 3.2487 in OD, 1.76 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
SELECTA® SS206A-BG Heavy Duty Toggle Switch, 125/250 VAC, 15/10 A, 3/4 hp, SPST
