TIMING BELTS

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H050>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H075>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H100>

H-PITCH X 80" DOUBLE TIMING BELT - JASD800H150>

H-PITCH X 85" DOUBLE TIMING BELT - JASD850H100>

H-PITCH X 90" DOUBLE TIMING BELTS-BRWD900H100>

H-PITCHX90" DOUBLE TIMING BELT-JASD900H300 >

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L050 >

CONSISTENT DIMENSIONAL STABILITY, LOW PRE-TENSION, LOW NOISE, HIGH ABRASION RESISTANCE, LOW MAINTENANCE, HIGH FLEXIBILITY, LINEAR SPEEDS UP TO 80-M/SECOND.
- JAS16AT10/1500>

100X L100 STANDARD TIMING BELTS, CHLOROPREME, 10" LONG, 1" WIDE
-JAS100XL100 >

1000H100 1/2" PITCH STANDARD TIMING BELT, MADE OF SYNTHETIC RUBBER
JAS1100H100 >

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESTANCE
-JAS11208M30 >

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESiTANCE
JAS11208M36 >

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS12005M15>



- JAS12005M15>

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS11208M50 >

EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
JAS124L050 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS1250H150 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS1260XH300 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS12808M50 >

A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 13" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS130XL037 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS140014M85 >

CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH OITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS1400H300 >

A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 14" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
JAS140XL037 >

142 X L037 TMING BELT. HEAT AND ABRASION RESISTANT. THEY HAVE FIBERGLASS TENSION MEMBERS, NEOPRENE BODY WITH NYLON COVERED TEETH. THEY ALL BOND TOGETHER FOR MAXIMUM STRENGTH
JAS142XL037 >