FHP BELTS 2L-3L-4L-5L
FHP V-BELT (2-L-170)OUTSIDE CIRCUMFERENCE 17."-GAT0170 >
FHP V-BELT (2-L-230)OUTSIDE CIRCUMFERENCE 23."-GAT0230 >
8-MM-PITCHX1120-MM TIMING BELT-GAT11208M60E >
FHP V-BELT (3-L-130) OUTSIDE CIRCUMFERENCE 13."-GAT1130 >
FHP V-BELT (3-L-140) OUTSIDE CIRCUMFERENCE 14."-GAT1140 >
FHP V-BELT (3-L-170) OUTSIDE CIRCUMFERENCE 17."-GAT1170 >
FHP V-BELT (3-L-180) OUTSIDE CIRCUMFERENCE 18."-GAT1180 >
FHP V-BELT (3-L-240) OUTSIDE CIRCUMFERENCE 24."-GAT1240 >
FHP V-BELT (3-L-260) OUTSIDE CIRCUMFERENCE 26."-GAT1260 >
FHP V-BELT (3-L-300) >OUTSIDE CIRCUMFERENCE 30."-GAT1300 >
FHP V-BELT (3-L-330) >OUTSIDE CIRCUMFERENCE 33."-GAT1330 >
FHP V-BELT (3-L-340) >OUTSIDE CIRCUMFERENCE 34."-GAT1340 >
FHP V-BELT (3-L-350) >OUTSIDE CIRCUMFERENCE 35."-GAT1350 >
FHP V-BELT (3-L-360) >OUTSIDE CIRCUMFERENCE 36."-GAT1360 >
FHP V-BELT (3-L-370) >OUTSIDE CIRCUMFERENCE 37-GAT1370 >
FHP V-BELT (3-L-410) OUTSIDE CIRCUMFERENCE 41."-GAT1410 >
FHP V-BELT (3-L-430) OUTSIDE CIRCUMFERENCE 43."-GAT1430 >
FHP V-BELT (3-L-460) OUTSIDE CIRCUMFERENCE 46."-GAT1460 >
FHP V-BELT (3-L-500) OUTSIDE CIRCUMFERENCE 50."-GAT1500 >
FHP V-BELT (3-L-520) OUTSIDE CIRCUMFERENCE 52."-GAT1520 >
FHP V-BELT (3-L-530) OUTSIDE CIRCUMFERENCE 53."-GAT1530 >
FHP V-BELT (3-L-540) OUTSIDE CIRCUMFERENCE 54."-GAT1540 >
FHP V-BELT (3-L-560) OUTSIDE CIRCUMFERENCE 56."-GAT1560 >
FHP V-BELT (3-L-580) OUTSIDE CIRCUMFERENCE 58."-GAT1580 >
Recently Viewed
20-V LED AREA LIGHT-BD-DCL050>
TIGHT GRIP SCREW-ON FILE HANDLE FOR 12
" FILES-BRU30575 >
Klein® KTSB14 Step Drill Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, Steel, 3/8 in Shank
Straight, Double Fluted Step Drill Bits from Klein Tools provide cleaner cutting and drilling. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. 3/8-Inch hex shank is durable, and has a firm, positive grip. Laser-etched markings provide quick size identification on primary holes. This step bit has 12-hole sizes from 3/16-Inch to 7/8-Inch (4.8 to 22.2 mm).
2" X 110-YARDS TAN BOX SEALING TAPE-ATCF502005 >
Martin 704 Open End Wrench, 3/4 in Wrench, Angled/Single Head, 7-1/4 in L, Drop Forged Alloy Steel, Industrial Black
Single Head Open End Wrenches (also referred to as “Engineer’s” wrenches) are drop forged from steel bar. They are available in fractional sizes only from 1/2” through 5”.These are special purpose single end wrenches with an extra thick 15 degree angled opening designed for heavy industrial service. 1-13/16” and larger sizes have a tapered handle. They come in an industrial black finish.
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
