SPHERICAL ROLLER BEARINGS
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22226 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22226K >
TPR-ID SPHERICAL ROLLER BEARING-NTN22226K >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22228 >
TPR-ID SPHERICAL ROLLER BEARINGS-FAG22228K>
TPR-ID SPHERICAL ROLLER BEARING-GUL22228K >
STR-ID SPHERICAL ROLLER BEARINGS-FAG22230>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22230 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22230K >
TPR-ID SPHERICAL ROLLER BEARINGS-SNR22230K>
TPR-ID SPHERICAL ROLLER BEARINGS-SNR22232K>
TPR-ID SPHERICAL ROLLER BEARING-GUL22232K >
TPR-ID SPHERICAL ROLLER BEARINGS - NTN2232K
STR-ID SPHERICAL ROLLER BEARING-SNR22234>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22234 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22234K >
TPR-ID SPHERICAL ROLLER BEARING-NTN22234K >
STR-ID SPHERICAL ROLLER BEARINGS-SNR22235>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22236 >
TPR-ID SPHERICAL ROLLER BEARING-GUL22236K >
Bore Diameter: 40 mm (1.57 inches) Outside Diameter: 90 mm (3.54 inches) Width: 33 mm (1.3 inches) Weight: Approximately 1.0 kg (2.27 lbs)Maximum RPM: Up to 8,000 RPM
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22308 >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22308 >
Spherical roller bearing with relubrication features
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.
Accommodate misalignment
High load carrying capacity
Relubrication features
Low friction and long service life
Increased wear resistance
Recently Viewed
20" X 28" QUILT INDOOR AIR/CONDITIONER COVER-JWH265918>
DRILLCO 350N107 Heavy Duty Imperial Mechanics Drill, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. 3-flats.
The Porter-Cable® standard router edge guide provides controlled cuts for consistent results. It uses the straight edge of the workpiece to guide the router for edge cuts, as well as inside cuts. This edge guide is easy to set-up and adjust with simple thumbscrew clamps. It fits Porter-Cable® routers, models 100, 150, 350, 630, 670, 690, 693 and 691 (with Type 1 or 2 base). Made with all metal construction.
5/16" 6-PT FULL POLISH LONG COMBINATION WRENCH-ARS25310 >
1/2" 90/ LIQUIDTIGHT CONDUIT CONNECTOR-APLST9038 >
DRILLCO 350N110 Heavy Duty Imperial Mechanics Drill, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. 3-flats.
