SPHERICAL ROLLER BEARINGS
STRAIGHT-ID SPHERICAL ROLLER BEARING - NTN22222>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22222 >
Bore Diameter (Inner): 110 mm Outside Diameter (Outer): 200 mm Width (Thickness): 53 mm Dynamic Load Rating: 572 kN Static Load Rating: 640 kN
STR-ID SPHERICAL ROLL BEARINGS-SNR22220V>
TPR-SPHERICAL ROLLER BEARINGS
TPR-ID SPHERICAL ROLLER BEARING-GUL22220K >
TPR-ID SPHERICAL ROLLER BEARING-NTN22220K >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22220 >
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22220 >
22220 Str-ID Spherical Roller Bearing
Bore Diameter (ID): 100 mm Outside Diameter (OD): 180 mm Overall Width (W): 46 mm Basic Dynamic Load Rating: 433 kN Basic Static Load Rating: 490 kN Limiting Speed: 4,500 r/min
STR-ID SPHERICAL ROLLER BEARINGS-FAF22220>
22220 Str-ID Spherical Roller
STR-ID SPHERICAL ROLLER BEARINGS-FAG22220>
TPR-ID SPHERICAL ROLLER BEARING-GUL22219K >
TPR-ID SPHERICAL ROLLER BEARINGS-SNR22216K>
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22219 >
STRAIGHT-ID SPHERICAL ROLLER BEARING-NTN22219 >
TPR-ID SPHERICAL ROLLER BEARING - NAC22218K>
22218-K Tpr-ID Spherical Roller Bearing
TPR-ID SPHERICAL ROLLER BEARING-SNR22218K>
TPR-ID SPHERICAL ROLLER BEARING - FAF22218K>
TPR-ID SPHERICAL ROLLER BEARING-GUL22218K >
TPR-ID SPHERICAL ROLLER BEARING - KOY22218K>
TPR-ID SPHERICAL ROLLER BEARING-NTN22218K >
TAPER-ID SPHERICAL ROLLER BEARING-NSK22218K >
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL22218 >
Recently Viewed
1/2" -FEMALE PIPE THREAD #316" STAINLESS STEEL UNIONS-FIT1/2SSU316 >
10-24" X 3/8" Stainless Steel Socket Head Set Screws
1/2" ELECTRIC CONDUIT LB UNILETS 1/2" TYPE " LB" THREADED OVAL BODY FOR RIGID CONDUIT. PRESSURE CASE, ASSEMBLED COVER AND GASKET.-JWH502189 >
United Abrasives SAIT 27050 11/16x1-1/4x1/4 Type A12 Vitrified Aluminum Oxide Mounted Points A60R, 10 pack
• Aluminum oxide grain
• Ideal for ID grinding and mold finishing
• Each point is dressed for perfect balance to perform without vibration or run-out
• Mandrel overhang "O" must always be the lowest possible. Maximum speeds given refer to overhang "O" equal to 1/2"
• Shank diameter 1/4”, length 1-1/2”
IDC Select 19-TOOTH #50 CHAIN SPROCKETS IDC 50-B-19-F-3/4
IDC Select® offers a wide range of high quality roller chain sprockets produced in ISO certified facilities to ANSI standards. Plain bore, finished bore, taper and QD® bushing designs are available. All IDC Select® sprockets come with hardened teeth and black oxide finish for long lasting service life. The finished bore design comes complete with a keyway on the centerline of the sprocket tooth and two setscrews, one over the keyway and one at 90 deg.
1-1/8"-ID 1610-STYLE TL BUSHINGS IDC 1610-1-1/8
1-1/8"-ID 1610-STYLE TAPER-LOCK BUSHING
