NEEDLE BEARINGS
NK-10/12 10-mm-ID a metric-series, light-duty machined needle roller bearing without an inner ring.
Bore Under Rollers (\(F_{w}\)) 10 mm
Outside Diameter (D) 17 mm
Outer Ring Width (C) 12 mm
Basic Dynamic Radial Load Capacity (\(C_{r}\)) 5,300 N (~1,190 lbf)
Basic Static Radial Load Capacity (\(C_{0r}\)) 5,500 N (~1,240 lbf)
Limiting Operating Speed 29,500 RPM
Total Component Net Mass ~10.3 grams
NK-12/12 12-mm-ID a metric-series, light-duty machined needle roller bearing without an inner ring.
Bore Under Rollers (\(F_{w}\)) 12 mm
Outside Diameter (D) 19 mm
Outer Ring Width (C) 12 mm
Basic Dynamic Radial Load Capacity (\(C_{r}\)) 7,200 N
Basic Static Radial Load Capacity (\(C_{0r}\)) 7,100 N
Limiting Operating Speed 26,500 RPM (Oil) / 25,000 RPM (Grease)
NK-65/35 ) is a metric-series, machined-ring single-row needle roller bearing without an inner ring.
• Under-Roller Diameter (Fw / Bore Size): 65 mm (2.5591 in)
• Outside Diameter (D): 78 mm (3.0709 in)
• Overall Width (C): 35 mm (1.3780 in)
• Cage Material: Sheet Steel Cage
• Basic Dynamic Load Rating (Cr): 66,000 N (14,837 lbf)
• Basic Static Load Rating (C0r): 142,000 N (31,922 lbf)
• Limiting Speed: 7,200 RPM
• Approximate Weight: 314 g (0.69 lbs)
NKI-20/20 12-mm-ID Needle a premium, machined needle roller bearing with an inner ring manufactured by Schaeffler (INA).
• Bore Diameter (d): 20 mm
• Outside Diameter (D): 32 mm
• Width (B): 20 mm
• Basic Dynamic Load Rating (Cr): 21,400 N
• Basic Static Load Rating (C0r): 30,500 N
• Limiting Speed: 18,500 RPM
NKI-35/20ight series, metric machined needle roller bearing
• Bore Diameter (d): 35 mm
• Outside Diameter (D): 50 mm
• Width (B): 20 mm
• Inner Ring Raceway Diameter (Fw): 40 mm
• Basic Dynamic Load Rating (\(C_{r}\)): 33.5 kN (33,500 N)
• Basic Static Load Rating (\(C_{0r}\)): 56.0 kN (56,000 N)
• Limiting Speed: 11,400 RPM
• Weight: ~0.121 kg
NKX-45-Z 45-mm-ID ) is a combined needle roller and thrust ball bearing designed to handle both heavy radial loads and axial thrust loads in one direction.
• Bore / Shaft Diameter (\(F_{w}\)): 45 mm
• Outer Diameter (D): 58 mm
• Total Assembly Width (C): 32 mm
• Thrust Section Shield Diameter (D₂): 66.5 mm
• Thrust Part Width (C₁): 14 mm
• Radial Dynamic Load Rating (\(C_{r}\)): 31,000 N (31 kN)
• Radial Static Load Rating (\(C_{0r}\)): 53,000 N (53 kN)
• Axial Dynamic Load Rating (\(C_{a}\)): 28,000 N (28 kN)
• Axial Static Load Rating ((C_{0a}}): 69,000 N (69 kN)
• Limiting Speed: 3,600 r/min
NTA-1220 3/4"-ID Flat Thrust Needle Bearing
3/4"-ID FLAT THRUST NEEDLE BEARING-TORNTA1220 >
NTA-2233 1-3/8"-ID Thrust Needle Bearing
1-3/8"-ID THRUST NEEDLE BEARINGS-TORNTA2233 >
NTA-613 3/8"-ID Flat Thrust Needle Bearing
3/8"-ID FLAT THRUST NEEDLE BEARING-TORNTA613 >
PAPZ-0808-P-10 INA BEARING a maintenance-free metric Permaglide plain bushing / sleeve bearing
Inside Diameter / Bore (d) 8 mm
Outside Diameter (D) 10 mm
Overall Width / Length (B) 8 mm
Basic Dynamic Radial Load Capacity (\(C_{r}\)) 8,960 N
Basic Static Radial Load Capacity (\(C_{0r}\)) 16,000 N
Operating Temperature Range -200°C to +280°C
Net Component Weight ~1.57 grams
PAPZ-1416-P-10 INA BEARING a maintenance-free, metric Permaglide plain bushing (sleeve bearing)
nside Diameter / Bore (d) 14 mm
Outside Diameter (D) 16 mm
Overall Width / Length (B) 16 mm
Approximate Weight 0.0228 kg (~22.8 grams)
Material Base Steel backing with a sintered tin-bronze interlayer
PAPZ-1616-P-10 INA BEARING an inch-series, maintenance-free Permaglide plain split bushing
• Bore / Inside Diameter (d): 1.000 inch (25.40 mm)
• Outside Diameter (D): 1.125 inches / 1-1/8 in (28.575 mm)
• Width / Length (B): 1.000 inch (25.40 mm)
• Material Composition: P10 composite structure consisting of a strong steel backing layer, a porous bronze interlayer, and a low-friction PTFE-based overlay matrix designed for completely dry operation.
PAPZ-1624-P-10 INA BEARING an inch-series, maintenance-free Permaglide plain split bushing
• Bore / Inside Diameter (d): 1.000 inch (25.40 mm)
• Outside Diameter (D): 1.125 inches (28.575 mm)
• Width / Length (B): 1.500 inches (38.10 mm)
• Material Composite: P10 material structure features a rigid steel backing sleeve layer bonded to a porous bronze sinter layer, vacuum-impregnated with a self-lubricating PTFE friction matrix.
PAPZ-2020-P-10 INA BEARING The PAP2020-P10 INA is a bushing. Bushings have a very simple, one-piece cylindrical design without rolling elements
PERMAGLIDE BEARING-INAPAPZ2020P10>
PAPZ-2424-P-10 a metal-polymer composite Permaglide plain bushing designed for wrapped inch-series applications.
• Inside Diameter (Shaft Size): 1.500 inches (38.10 mm)
• Outside Diameter (Housing Bore): 1.656 inches (42.06 mm)
• Width (Length): 1.500 inches (38.10 mm)
• Operating Temperature Range: –200 °C to +280 °C
• Maximum Static Load: ~250 N/mm²
• Maximum Dynamic Load: ~140 N/mm²
PAPZ-3224-Pa metal-polymer composite Permaglide plain bushing designed for wrapped inch-series applications.
• Inside Diameter (Shaft Size): 2.000 inches (50.80 mm)
• Outside Diameter (Housing Bore): 2.156 inches (54.77 mm) (Note: Permaglide inch bushings use standard fraction-based wall thicknesses, typically 0.078" per side for this grouping).
• Width (Length): 1.500 inches (38.10 mm)
• Operating Temperature Range: –200 °C to +280 °C (depending on load limits)
• Maximum Static Load: ~250 N/mm²
• Maximum Dynamic Load: ~140 N/mm²
PI-061012 n inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
• Inside Diameter (Bore): 3/8 inch (0.3750 in / 9.525 mm)
• Outside Diameter (Raceway): 5/8 inch (0.6250 in / 15.875 mm)
• Overall Width: 3/4 inch (0.7500 in / 19.05 mm)
• Component Type: Separable Inner Ring Only
• Material: High-Carbon Chrome Bearing Steel (Hardened & Ground)
PI-081212 an inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
NEEDLE BEARING INNER RACES-INAPI061008>
PI-081216an inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
• Inside Diameter (Bore): 1/2 inch (0.5000 in / 12.70 mm)
• Outside Diameter (Raceway): 3/4 inch (0.7500 in / 19.05 mm)
• Overall Width: 1 inch (1.0000 in / 25.40 mm)
• Component Type: Separable Inner Ring Only
• Material: High-Carbon Chrome Bearing Steel (Hardened & Ground)
Recently Viewed
Drillco 380A030 Type C Heavy Duty Stub Length Screw Machine Length Drill, #30 Drill - Wire, 0.0551 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
Gates 5-VX-500 5VX Section, 5/8 in Top Width, 1 Strand, 50.0000 in Nominal Outside Length, Cogged
Finding a belt that fits into your compact machinery without sacrificing power or efficiency is a daily challenge. When every inch of space is precious and traditional belts just don't cut it, the Super HC Molded Notch (MN) V-belt is your solution. This bandless, high-performance belt, crafted from ethylene elastomer with precision-molded notches, provides superior cord support and flexibility to improve load distribution and reduce maintenance needs. Whether you aim to boost your drive efficiency or minimize downtime, Gates Super HC MN V-belts deliver the durability and performance to keep your industrial processes running smoothly.
3-GRV BANDED B45 V-BELTS-PIXB45/03>
Browning® 3331733 Single Strand QD Bushed Type QD-1 Roller Chain Sprocket, 1/2 in Dia Bore, 11.072 in OD, #80 Chain, 33 Teeth, Steel
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
H-PITCHX45" TIMING BELT-JAS450H100 >
1.000" X 1.499" X .250" OIL SEAL-CHI9876 >
