NEEDLE BEARINGS
SCE-2816 an inch-series drawn cup needle roller bearing featuring an open-end design.
• Under-Roller Bore Diameter (\(F_{w}\)): 1.7500 inches (44.450 mm)
• Outside Diameter (D): 2.1250 inches (53.975 mm)
• Width (C): 1.0000 inch (25.400 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 45.5 kN (10,230 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 87.0 kN (19,560 lbf)
• Limiting Speed (Oil): 5,900 RPM
• Mass (Weight): ~0.207 lbs (94 g)
SCE-2620 inch-series drawn cup needle roller bearing featuring an open-end design.
• \(F_{w}\)): 1.625 inches / 1-5/8" (41.275 mm)
• Outside Diameter (D): 2.000 inches / 2" (50.800 mm)
• Width (C): 1.250 inches / 1-1/4" (31.750 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 51,000 N (11,400 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 97,000 N (21,900 lbf)
• Limiting Speed: 6,200 RPM
• Mass (Weight): ~110.5 g (0.24 lbs)
SCE-2412 Drawn cup needle roller bearing open end
• Under Roller Diameter (Bore ID): 1-1/2 inches (38.1 mm)
• Outside Diameter (OD): 1-7/8 inches (47.625 mm)
• Overall Width: 3/4 inch (19.05 mm)
• Enclosure & End Design: Open ends
• Lubrication: Supplied without an oil hole (runs on external lubrication)
• Basic Dynamic Radial Load Rating (\(C_{r}\)): 30,500 N (~6,857 lbf)
• Basic Static Radial Load Rating (\(C_{0r}\)): 48,500 N (~10,903 lbf)
• Limiting Speed: 6,700 RPM (Grease) / 7,400 RPM (Oil)
• Weight: 0.13 lbs (62 g)
SCE-2410 is an inch-series drawn cup needle roller bearing with open ends, manufactured by Schaeffler (INA). It features a steel cage and is optimized for managing heavy radial loads in compact configurations like industrial gear drives and heavy machine
• Bore Diameter (ID): 1-1/2 inches (38.10 mm)
• Outside Diameter (OD): 1-7/8 inches / 1.875 inches (47.625 mm)
• Width: 5/8 inch / 0.625 inch (15.875 mm)
• Limiting Speed: 6,700 RPM to 7,400 RPM depending on the precise lubrication strategy
• Basic Dynamic Radial Load Rating: 5,485 lbf (36,500 N)
• Basic Static Radial Load Rating: 8,206 lbf
SCE-2110 1-15/16"-ID Needle Bearing inch-series drawn cup needle roller bearing with open ends,
• Under Roller Diameter / Bore (Fw): 1-5/16 inches / 1.3125 in (33.338 mm)
• Outside Diameter (D): 1-5/8 inches / 1.6250 in (41.275 mm)
• Width (C / B): 5/8 inch / 0.6250 in (15.875 mm)
• Basic Dynamic Load Rating (Cr): 4,760 lbf (21,200 N)
• Basic Static Load Rating (C0r): 7,530 lbf (33,500 N)
• Limiting Speed: 7,700 RPM (up to 8,400 RPM depending on oil lubrication type)
SCE-2012 1-1/4"-ID Needle • Bore/Inside Diameter (Fw): 1-1/4 inches (31.75 mm) [1] • Outside Diameter (D): 1-1/2 inches (38.10 mm) [1] • Width (C): 3/4 inch (19.05 mm) [1]
1-1/4"-ID NEEDLE BEARING-INASCE2012>
SCE-1816 1-1/8"-ID nch-series, drawn-cup needle roller bearing
• Bore Diameter (Fw): 1-1/8 inches (28.575 mm)
• Outside Diameter (D): 1-3/8 inches (34.925 mm)
• Width (C): 1 inch (25.40 mm)
• Limiting Speed: ~9,000 RPM
• Basic Dynamic Load Rating: 25,500 N
SCE-1612 1"-ID an inch-series, drawn-cup needle roller bearing
• Bore / Inside Diameter (Fw): 1.000 inch (25.40 mm)
• Outside Diameter (D): 1.250 inches / 1-1/4 in (31.75 mm)
• Width / Length (C): 0.750 inch / 3/4 in (19.05 mm)
• Basic Dynamic Load Rating (Cr): 18,000 N (4,050 lbf)
• Basic Static Load Rating (C0r): 30,000 N (6,750 lbf)
• Limiting Speed: 10,100 RPM
SCE-129-P INA BEARING an inch-series drawn cup needle roller bearing with a contact seal on one side
NEEDLE BEARING-INASCE129P>
SCE-128 3/4"-ID is an inch-series drawn cup needle roller bearing with open ends.
3/4"-ID NEEDLE BEARINGS-INASCE128>
SCE-1210-PP 3/4"-ID n inch-series drawn cup needle roller bearing with contact lip seals on both sides.
3/4"-ID NEEDLE BEARINGS-INASCE1210PP>
S-88 1/2"-ID an inch-series full complement drawn cup needle roller bearing with open ends
1/2"-ID NEEDLE BEARING-INAS88>
S-810 1/2"-ID an inch-series full complement drawn cup needle roller bearing with open ends
1/2"-ID NEEDLE BEARING-INAS810>
S-66 3/8"-ID most commonly refers to a drawn cup full complement needle roller bearing
• Bore / Inner Diameter: 3/8 in (9.525 mm)
• Outer Diameter: 9/16 in (14.288 mm)
• Width: 3/8 in (9.525 mm)
• Weight: 0.005–0.006 kg
• Material: Chrome Steel
• Basic Dynamic Load Rating (C): 5.8 kN (5,800 N)
• Basic Static Load Rating (C0): 7.9 kN (7,900 N)
• Limiting Speed: 10,700 r/min
S-3016 inch-series drawn cup needle roller bearing utilizing a full complement design. Unlike caged variants, a full complement bearing featu
• Under-Roller Bore Diameter (\(F_{w}\)): 1.875 inches (47.625 mm)
• Outside Diameter (D): 2.250 inches (57.150 mm)
• Width (C): 1.000 inch (25.400 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 60.0 kN (13,500 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 126.0 kN (28,500 lbf)
• Maximum Speed (Grease): 2,340 RPM
• Outer Cup Material: Hardened carbon steel alloy
• Roller Material: 52100 Chrome steel
S-2012 1-1/4"-ID Needle inch-series, drawn-cup needle roller bearing
• Bore Diameter (d): 1-1/4 in (31.75 mm)
• Outside Diameter (D): 1-1/2 in (38.10 mm)
• Width (B): 3/4 in (19.05 mm)
• Basic Dynamic Load Rating: 21,100 N (4,743 lbf)
• Basic Static Load Rating: 39,500 N (8,880 lbf)
• Limiting Speed: 8,200 RPM
S-1616-AS-1 1"-ID an inch-series, drawn-cup needle roller bearing
• Bore Diameter (Fw): 1.000 inch (25.40 mm)
• Outside Diameter (D): 1-1/4 inches (31.75 mm)
• Width (C): 1.000 inch (25.40 mm)
• Lubrication Provision: "AS1" oil feed hole included on the outer raceway
S-128 3/4"-IDan inch-series full complement drawn cup needle roller bearing with open ends.
3/4"-ID NEEDLE BEARINGS-INAS128>
S-1112-AS-1 11/16"-ID an inch-series radial needle roller and cage assembly.
11/16"-ID NEED BEARINGS-INAS1112AS1>
S-1012 5/8"-IDinch-series radial needle roller and cage assembly
5/8"-ID NEEDLE BEARINGS-INAS1012>
RNA-6904 25-mm-ID Needle Bearings W/o
25-MM-ID NEEDLE BEARINGS W/O RACES-IKORNA6904>
Recently Viewed
1/8 -MALE PIPE THREADX2 BLACK NIPPLE >
GEARWRENCH 3/8" drive sockets are manufactured from alloy steel for maximum durability and strength. Our off corner loading design reduces fastener rounding and the chamfered opening help guide the socket on to fasteners. Our sockets feature a double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.
1-3/16"-ID TORQUE LIMITER - IDC350X103>
MORSE® 38004 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MIG GAS FLOW METER AND REGULATOR IN ONE, FOR MIG/TIG WELDERS - Precision flow gauge regulator for MIG/TIG welding- dual gauges, UL compliant, rugged brass build, optimal control for Argon/COâ‚‚ applications - Preset output 50 PSIG for argon and CO2
25-MM-ID/BORE G-STYLE BUSHING - IDCG25MM>
