INSERT BEARINGS
G-1115-K-LL-B 1-15/16"-ID Sph/OD Insert
1-15/16"-ID SPH/OD INSERT BEARINGS-FAFG1115KLLB>
G-1115-K-RR 1-15/16" -ID Flat Insert
1-15/16" -ID FLAT INSERT BEARING-FAFG1115KRR >
G-1115-K-RR-B 1-15/16" -ID Spherical Insert
1-15/16" -ID SPHERICAL INSERT BEARING-FAFG1115KRRB >
G-1202-K-RR-B 1-15/16"-ID Sph/OD Insert
1-15/16"-ID SPH/OD INSERT BEARING-FAFG1202LRRB>
G-1203-K-RR-B 2-3/16"-ID Sph/OD Insert
2-3/16"-ID SPH/OD INSERT BEARINGS-FAFG1203KRRB>
G-1206-K-RR-B 2-3/8"-ID Sph/OD Insert
2-3/8"-ID SPH/OD INSERT BEARINGS-FAFG1206KRRB>
G-1207-K-RR-B 2-7/16"-ID high-performance, inch-series radial insert ball bearing featuring an extended inner ring and a spherical outer ring profile designed to fit inside standard pillow blocks and flanged bearing housings.
• Bore Diameter (ID): 2-7/16 inches (61.913 mm)
• Outside Diameter (OD): 4.7244 inches (120.00 mm)
• Overall Width (with Collar): 3.3110 inches (84.10 mm)
• Outer Ring Width: 1.0630 inches (27.00 mm)
• Locking Method: Eccentric locking collar
• Sealing Type: KRR (Double lip contact shroud seals on both sides)
• Dynamic Radial Load Capacity: 13,800 lbf (61,400 N)
• Static Radial Load Capacity: 9,200 lbf (40,900 N)
• Limiting Speed: 1,980 RPM
• Weight: ~4.74 lbs (2.15 kg)
G-1207-K-RR-B 2-7/16"-ID Spherical-OD Insert Bearing
2-7/16"-ID SPHERICAL-OD INSERT BEARING - FAFG1207KRRB>
G-1211-K-RR-B 2-1-1/16" -ID Spherical Insert
2-1-1/16" -ID SPHERICAL INSERT BEARING-FAFG1211KRRB >
G-1215-K-RR-B 2-15/16" -ID Spherical Insert
2-15/16" -ID SPHERICAL INSERT BEARING-FAFG1215KRRB >
G-RA-008-RR-B 1/2"-ID Sph/OD Insert
1/2"-ID SPH/OD INSERT BEARINGS-FAFGRA008RRB>
G-RA-012-RR-B 3/4"-ID Sph/OD Insert
3/4"-ID SPH/OD INSERT BEARINGS-FAFGRA012RRB>
G-RA-108-RR-B 1-1/2"-ID Sph/OD Insert
1-1/2"-ID SPH/OD INSERT BEARINGS-FAFGRA108RRB>
G-RA-111-RR-B 1-11/16"-bore/ID Spherical-OD Insert Bearing
1-11/16"-BORE/ID SPHERICAL-OD INSERT BEARING - FAFGRA111RRB>
G-RAE-55-PP-B 55-mm-ID Sph/OD Insert Bearings-fafgrae55ppb
55-MM-ID SPH/OD INSERT BEARINGS-FAFGRAE55PPB
GC-1115-K-RR-B 1-15/16"-ID Sph/OD Insert
1-15/16"-ID SPH/OD INSERT BEARING-FAFGC1115KRRB>
GE-30-K-RR-B 30-mm-ID Spherical Insert
30-MM-ID SPHERICAL INSERT BEARING-FAFGE30KRRB >
GN-103-K-LL-B 1-3/16"-ID Sph/OD Insert
1-3/16"-ID SPH/OD INSERT BEARINGS-FAFGN103KLLB>
GN-103-K-RR-B 1-3/16" -ID Spherical Insert
1-3/16" -ID SPHERICAL INSERT BEARING-FAFGN103KRRB >
GN-104-K-RR-B 1-1/4" -ID Spherical Insert
1-1/4" -ID SPHERICAL INSERT BEARING-FAFGN104KRRB >
GN-107-K-RR-B 1-7/16" -ID Spherical Insert
1-7/16" -ID SPHERICAL INSERT BEARING-FAFGN107KRRB >
Recently Viewed
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Proto® TorquePlus™ J47110 Combination Socket Set, Imperial, 12 Pieces, Full Polished
Aluminum decorator plank is twist proof and designed for one person use with a 250 pound load rating. Slip resistant decking minimizes paint or material build up. The stage is 12 in Wide and 20 ft long and has vinyl coated end caps.
MORSE® 13068 1333 General Purpose Jobber Length Drill Bit, 4.5 mm Drill - Metric, 0.1772 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
ELBOW WITH SIDE INLET. OFTEN USED WITH SPRINKLER SYSTEM RISERS AND UNDERGROUND SYSTEMS. SCHEDULE 40 COLD WATER PRESSURE FITTING. 1/2" SLIPX1/2" SLIPX1/2" THREADED F.I.P.-JWH414409 >
27 TOOTH SPROCKETS FOR #60 CHAIN-IDC60SK27 >
