CAM & YOKE FOLLOWER BEARINGS

1-3/4" CAM FOLLOWER-MCGCF13/4SB >

1-3/8"-OD STUD CAM FOLLOWERS-MCGCF13/8>

1-3/8" CAM FOLLOWER-MCGCF13/8S >

1-3/8" CAM FOLLOWER-MCGCF13/8SB >

1-5/8" CAM FOLLOWER-MCGCF15/8S >

1-5/8" CAM FOLLOWER-MCGCF15/8SB >

1-7/8" OD STUD CAM FOLLOWERS-MCGCF17/8S>

1/2"-OD STUD CAM FOLLOWERS-MCGCF1/2NS>

1-12" OD STUD CAM FOLLOWERS-MCGCF11/2S>

1/2" CAM FOLLOWER-MCGCF1/2SB >

• Outer Ring Roller Diameter (D): 0.6250 in / 5/8 in (15.875 mm)
• Roller Width (C): 0.4350 in to 0.4375 in / 7/16 in (11.11 mm)
• Stud Diameter (d): 0.2500 in / 1/4 in (6.35 mm) — Uses a 1/4-28 UNF threaded stud assembly
• Stud Length: 0.7500 in / 3/4 in (19.05 mm)

26-MM-OD STUD TYPE CAM FOLLOWERS-IKOCF101VBUUR>

• Outer Ring Diameter (D): 0.7500 in (19.05 mm)
• Stud Diameter (d): 0.3750 in (9.525 mm) — Uses a 3/8-24 UNF threaded stud
• Roller Width (C): 0.5000 in (12.70 mm)
• Stud Length (B): 0.8750 in (22.225 mm)

• Outer Ring Diameter (D): 0.7500 in (19.05 mm)
• Stud Diameter (d): 0.3750 in (9.525 mm) — Uses a 3/8-24 UNF threaded stud
• Roller Width (C): 0.5000 in (12.70 mm)
• Stud Length (B): 0.8750 in (22.225 mm)
• Internal Matrix: Caged needle roller design, which lowers internal friction and runs cooler to allow for higher rotational speed limits than full-complement alternatives.

• Outer Ring Diameter (D): 31.75 mm (1.2500 in)
• Stud Diameter (d): 12.70 mm (0.5000 in) — Uses a 1/2-20 UNF threaded stud
• Roller Width (C): 19.05 mm (0.7500 in)
• Stud Length (B): 31.75 mm (1.2500 in)
• Internal Design: Internal needle rollers with a cage for optimized grease distribution and higher speed limits than full-complement versions.

7/8" SEALED HEX CAM FOLLOWERS-INACF14PPSK>

• Roller Diameter (D): 16 mm (approx. 0.63 in)
• Roller Width (C): 11 mm
• Stud Diameter (d1): 6 mm (Threaded M6x1 pitch)
• Overall Stud Length: 28 mm
• Bearing Element: Needle rollers with internal cage (lower friction for higher speed)
• Sealing (PP): "PP" Double-lip contact seals on both sides to preserve internal lubrication and block grit
• Adjustment Face: Screwdriver slot head (unlike the "SK" variant which uses an internal hex socket)

• Roller Diameter (D): 16 mm
• Roller Width (C / B): 11 mm
• Stud Diameter (d1): 6 mm (Threaded M6x1 pitch)
• Overall Stud Length: 28 mm
• Dynamic Load Capacity: 3,150 N (approx. 710 lbf)
• Static Load Capacity: 3,350 N (approx. 740 lbf)
• Maximum Speed: 22,000 RPM (with continuous grease lubrication)

• Roller Diameter: 1.125 inches (1-1/8")
• Roller Width: 0.6250 inches (5/8")
• Thread Size: 7/16"-20
• Bearing Element: Needle Roller
• Enclosure: Sealed (PP)
• Outer Ring Shape: Flat / Cylindrical
• Adjustment Mechanism: Screwdriver slot head

1-1/8" SEALED HEX CAM FOLLOWERS-INACF18PPSK>

2-1/2" CAM FOLLOWER-MCGCF21/2S >

2-1/2" CAM FOLLOWER-MCGCF21/2SB >

2-1/4" OD STUD CAM FOLLOWERS-MCGCF21/4"

2-1/4" CAM FOLLOWER-MCGCF21/4S >