BALL BEARINGS
21103-77 Radial/Deep Groove Ball Bearing - Straight Bore, 0.1875 in ID, 0.6875 in OD, 0.3120 in Width, Double Sealed, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN2110377>
21101-01 Radial/Deep Groove Ball Bearing - Straight Bore, 0.1875 in ID, 0.6875 in OD, 0.2500 in Width, Open, Without Snap Ring
DOUBLE OPEN FACE BALL BEARINGS-GEN2110101>
211-MF MRC BALL BEARING a high-capacity, single-row radial deep groove ball bearing
Bore Diameter: 55 mm Outside Diameter: 100 mm Width: 21 mm Max RPM (Grease): 5200 rpm Max RPM (Oil): 6300 rpm Radial Dynamic Load: 48,400 N (10,900 lb.) Radial Static Load: 44,000 N (9890 lb.)
211-M-FF MRC BALL BEARINGS high-capacity, single-row radial deep groove ball bearing
Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings
DOUBLE SHIELDED BALL BEARINGS-FAF211KDD>
DOUBLE OPEN FACE BALL BEARINGS
DOUBLE OPEN FACE BALL BEARINGS-FAF210W>
209-SFF Single Row Deep Groove Ball Bearing a high-quality, single-row radial deep groove ball bearing
Bore Diameter (ID): 45 mm Outside Diameter (OD): 85 mm Overall Width: 19 mm Closure Type: Double Shielded (Metal shields on both sides Internal Clearance: C3 (greater than normal radial internal clearance) Max Speed: Up to 9,000 RPM Material: High-quality bearing steel
DOUBLE SEALED BALL BEARING-FAF209PP>
he MRC 209MF is a single-row deep groove radial ball bearing with filling slots (a "max type" bearing). It features a 45 mm inner diameter, 85 mm outer diameter, and 19 mm width, and includes a single shield. It accommodates higher radial loads than standard bearings but cannot handle significant thrust loads.
SINGLE SHIELDED BALL BEARINGS-FAF209KD>
MAXIMUM CAPACITY SHIELDED BEARING-NSK208ZZ >
MAXLOAD DOUBLE SHIELDED BALL BEARING - FAF208WDD>
208-SFF Wide Single Row Bearing • Bore Diameter (Inner): 40 mm (1.5748 in) • Outside Diameter: 80 mm (3.1496 in) • Overall Width: 18 mm (0.7087 in)
The MRC 208SFF is a heavy-duty, single-row deep groove radial ball bearing manufactured by MRC (a brand under SKF). It features a straight bore and a double-shielded closure ("FF" suffix), making it highly effective at retaining grease while keeping out dust and contaminants. Key Technical Specifications Bore Diameter (Inner ID): 40 mm Outside Diameter (OD): 80 mm Width: 18 mm Enclosure Type: Double Shielded (Metal shields on both sides) Dynamic Load Capacity: 6,900 lb. Static Load Capacity: 4,270 lb. Maximum Speed: 10,000 RPMInterchange Equivalents: Cross-references directly with standard industry part number 6208-2Z (or 6208-ZZ).
208-S-ZZ-C Radial/Deep Groove Ball Bearing - Straight Bore, 40 mm ID, 80 mm OD, 1.1882 in Width, Double Sealed, Without Snap Ring
Cylindrical Bore Deep Groove Ball Bearing
Item #100760654
Deep Groove Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
The MRC 208CFF is a single-row deep groove type ball bearing featuring two metal shields. Manufactured under the MRC brand (by SKF), this specific configuration is equivalent to a standard 6208-2Z or 6208ZZ bearing. Key Specifications Bore Diameter (Inner): 40 mm Outside Diameter: 80 mm Width: 18 mm Closure Type: Double Shielded (indicated by the FF suffix).
MAXIMUM CAPACITY SHIELDED BEARING-NSK207ZZ >
MAX-TYPE LOAD BALL BEARINGS-FAF207W>
DOUBLE SEALED BALL BEARINGS-FAF207PP>
DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>
MAX LOAD CAPACITY BALL BEARINGS-FAF206W>
DOUBLE SEALED BALL BEARINGS-FAF206PP>
DOUBLE SEALED BALL BEARING-FAF206PP>
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
Recently Viewed
Gates® Power Transmission 4MJ-6MP90 SAE to SAE Hydraulic Flange Adapter, 7/16-20 x 3/8-18 Nominal, Male 37 deg JIC Flare x Male NPTF End Style, Steel
United Abrasives-SAIT 1AX Quick Ship™ 60534 Semi-Friable Coated Abrasive Belt, 2 in W x 72 in L, 36 Grit, Medium Grade, Aluminum Oxide Abrasive, Cotton Backing
7" GALVANIZED ROOF FLASHING-JWH410987>
Dichtomatik N70366 O-Ring, 366 Dash Number, 7.225 in ID x 7.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Crosby® 1019356 210 1-1/4 Chain Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1019356 Chain Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
