Cordless Tool Accessories

Milwaukee® 2846-20 M18™ TOP-OFF™ Portable Power Supply Inverter With (1) 120 VAC Outlet, (1) USB-C PD Port and (1) USB-A Port, For Use With M18™ Batteries, 175 W, 18 V

The MILWAUKEE® M18™ TOP-OFF™ 175W Power Supply delivers faster simultaneous power to personal devices and small electronics. Attach any M18™ battery to provide continuous power or recharge devices with (1) AC 120V outlet, (1) USB-C PD port, and (1) USB-A port. Quickly charge up to three devices at the same time, without the barriers of speed throttling. With the USB-C PD port (45W), this battery inverter is capable of recharging devices, from a fully depleted state to 80% capacity, up to 75% faster than conventional wall chargers (5W). The compact portable power supply has an attached metal rafter hook that can be extended to hang it from carts, lumber, or other jobsite materials when worksurface space is limited. Instantly set up a mobile workstation or keep electronics securely within eyeshot, rather than making frequent trips to a wall outlet.

Milwaukee® 48-59-1880 Starter Kit, For Use With M18™ 18 V Cordless Tools, 8 Ah, XC™ Lithium-Ion Battery, 120 V AC

The M18 REDLITHIUM™ HIGH OUTPUT™ XC8.0 battery pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM™ XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM™ HIGH OUTPUT™ XC8.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM high output XC8.0 battery is fully compatible with all 175+ M18 solutions.

Milwaukee® 49-16-750A Crimping Jaw, For Use With M18™ FORCE LOGIC™ 2679-20 and 49-16-U111 600 kcmil Crimper

The MILWAUKEE® 750 MCM Cu/Al Crimping Jaw with 400-750 MCM Al 6T U Style Dies is the Most Accurate Way to Crimp, producing cULus classified crimps according to the UL 486A-B classification standards for #8 - 750 MCM Copper & Dual Rated Anderson, Blackburn® Burndy, Ilsco, Panduit, Penn-Union and Thomas & Betts Connectors. The crimping jaw uses Milwaukee U Style Dies that have vivid wire size markings and industry-standard color markings. The aluminum crimper dies imprint wire size onto the connector after crimp completion. The crimper is made for commercial electricians and is designed to provide ease of use and easy inspection. For use with the M18™ Force Logic™ 600 MCM Crimper (2679-20).

Milwaukee® 49-22-8510 Compact Heavy Duty Right Angle Attachment Kit, For Use With Right Angle Grinder, 90 deg Offset, 1/4 in Dia Shank, 235 in-lb Torque

Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. When you get tired of using a Stubby screwdriver you can either shell out the big bucks for a right angle drill or you can save your money and purchase Milwaukee's right angle attachment. Milwaukee Tool, one of the most respected names in the tool industry, manufactures a 1/4 in. hex right angle attachment that is ideal for cordless drills up to and including the more powerful 18 Volt models. The tool’s quick-change magnetic chuck accepts standard 1/4 in. hex drive accessories and the durable metal housing utilizes steel gears and ball bearing construction that gives the user a full 235-inch-pounds of torque.

Milwaukee® 49-52-0650 Long Replacement Plunger Rod, For Use With 6560 and 6562 Caulk and Adhesive Gun

Replacement plunger rod for model 6560 and 6562 Milwaukee caulk gun when set up to use the quart size tube/carriage.

Milwaukee® 49-72-0152 Die Holder Extension, For Use With M12

The MILWAUKEE® M12 FUEL16 ga Nibbler Die Holder Extension is compatible with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. It is intended to be used for cutting deeper corrugated metal materials. This accessory is quick to assemble and can be changed without the need of an additional tool.

Milwaukee® M12 FUEL™ 49-16-2485 Protective Boot, For Use With 2485-20 Tool and M12™ FUEL™ 1/4 in Right Angle Die Grinder

The MILWAUKEE® die grinder tool boot is for use with the M12 FUEL™ Right Angle Die Grinder (2485). This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. The die grinder accessory is not for use on or near live electrical circuits. Use on any other product other than the M12 FUEL™ Right Angle Die Grinder (2485) may result in damage to the tool motor and may void the tool's warranty.

Milwaukee® M12 FUEL™ 49-16-2556 Protective Tool Boot, For Use With M12 FUEL™ 2556-20 1/4 in Ratchet

The Milwaukee 49-16-2556 tool boot is for use with Milwaukee M12 FUEL™ 1/4 in. ratchet (2556-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

Milwaukee® M12 FUEL™ 49-16-2558 Ratchet Protective Tool Boot, For Use With M12 FUEL™ 2558-20 Serial J20A 1/2 in Ratchet, 1/2 in

The Milwaukee 49-16-2558 tool boot is for use with Milwaukee M12 FUEL™ 1/2 in. ratchet (2558-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

Milwaukee® ProPEX® 49-16-2616 Expansion Head, For Use With M18™ FORCE LOGIC™ 2 in to 3 in ProPEX® Expansion Tool, 2-1/2 in OD Capacity Tubing, 4-11/16 in OAL

The 2 in., 2-1/2 in., and 3 in. ProPEX® expansion heads are precision engineered to evenly expand Uponor® large diameter PEX pipe for ProPEX® fittings. These heads are compatible with the M18™ Force Logic™ 2 in. to 3 in. ProPEX® expansion tool and auto-rotate. Each head is both black oxide coated for durability and weather resistance, and has color coded rings and large size ID markings for easy selection.