REDUCERS
1" X 1/2" 90-DEG COPPER REDUCERS-ELK107CR1X1/2>
1" X 3/4" 90-DEG COPPER REDUCERS-ELK107CR1X3/4>
3/4" X 1/2" 90-DEG COPPER REDUCERS-ELK107CR3/4X1/2>
1" X 1/2" COPPER SWEAT REDUCERS-ELK1181X1/2>
1-1/4" X 1" COPPER SWEAT REDUCER-ELK11811/4X1 >
1/2" X 3/8" COPPER SWEAT REDUCERS-ELK1181/2X3/8>
1" X 3/4" COPPER FITTING REDUCER-ELK1181X3/4 >
3/4" X 1/2" COPPER SWEAT REDUCER-ELK1183/4X1/2 >
3/8" X 1/4" COPPER SWEAT REDUCERS-ELK1183/8X1/4>
COPPER TO COPPER, SWEAT SOLDER FITTING; 1/2" TO 3/8" NOMINAL COPPER-JWH417061 >
45-DEGREE COPPER TO COPPER; SWEAT SOLDER FITTING; 1/2" TO 1/2" NOMINAL COPPER-JWH418319 >
45-DEGREE COPPER TO COPPER; SWEAT SOLDER FITTING; 3/4" TO 3/4" NOMINAL COPPER-JWH418328 >
1-1/2" X 1" COPPER SWEAT COUPLING-NIB600R11/2X1 >
1-1/2" X 1/2" COPPER SWEATCOUPLING-NIB600R11/2X1/2 >
1-1/2" X 3/4" COPPER COUPLING-NIB600R11/2X3/4 >
1-1/4" X 1" COPPER SWEAT COUPLING-NIB600R11/4X1 >
1-1/4" X 1/2" COPPER COUPLING-NIB600R11/4X1/2 >
1-1/4" X 3/4" COPPER COUPLING-NIB600R11/4X3/4 >
1/2" X 1/4" COPPER SWEAT COUPLING-NIB600R1/2X1/4 >
1/2" X 1/8" COPPER SWEAT REDUCER-NIB600R1/2X1/8 >
1/4" X 1/8" COPPER SWEAT COUPLING-NIB600R1/4X1/8 >
1-1/2" X 1-1/4" COPPER COUPLING-NIB600R11/2X11/4 >
1" X 1/2" COPPER SWEAT COUPLING-NIB600R1X1/2 >
1" X 3/4" COPPER SWEAT COUPLING-NIB600R1X3/4 >
Recently Viewed
Browning® 3695087 Type B Split-Taper Bushing, 13/16 in Dia Bore, 2.557 in Dia Small End/2-5/8 in Dia Large End Dia Barrel, 3.688 in Dia Flange, 1.938 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA76K>
THESE BELTS FOLLOW A CLASSICAL V-BELT PROFILE, WHICH ENSURES COMPATIBILITY WITH A VARIETY OF STANDARD PULLEY SYSTEMS. THE WRAPPED CONSTRUCTION PRVIDES ENHANCED PROTECTION AGAINST ENVIRONMENTAL FACTORS. THEY ARE MADE OF RUBBER COMPOUNDS AND STRONG TENSION MEMBERS. THEY ARE RESISTANT TO HEAT AND OIL AND STATIC.
PIXC146>
PIX A-130 IS A CLASSICAL V-BELT 132" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
PIXA130 >
PIX A-117 IS A CLASSICAL V-BELT, 119" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA117 >
PIX A-107 IS A CLASSICAL V-BELT, 109" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
- PIXA107>
