Air Hose
7093-25300 1/4" Black 300-psi Air Hose (ft)
1/4" BLACK 300-PSI AIR HOSE (FT)-DAY709325300 >
7212-251-BK 1/4" 300-psi Spiral Push-on
1/4" 300-PSI SPIRAL PUSH-ON HOSE-DAY7212251BK >
7212-381-BK 3/8" 300-psi Spiral Push-on
3/8" 300-PSI SPIRAL PUSH-ON HOSE-DAY7212381BK >
7212-501-BK 1/2" 300-psi Spiral Push-on
1/2" 300-PSI SPIRAL PUSH-ON HOSE-DAY7212501BK >
7212-751-BK 3/4" 300-psi Spiral Push-on
3/4" 300-PSI SPIRAL PUSH-ON HOSE-DAY7212751BK >
7284-381-50 3/8" -male Pipe Threadx50' Yellow
3/8" -MALE PIPE THREADX50' YELLOW BIRD HOSE-DAY728438150 >
B-0406 COILHOSE PNEUMATICS PRODUCTS
1/4" -HOSEX3/8" -MALE PIPE THREAD HOSE BARB-COIB0406 >
COILHOSE PNEUMATIC PRODUCTS N-14-Y-N-14N12B 1/4" - Twin Hose X 12' W/Swivel Ends
N14Y-N14N-12B by Coilhose | Twin Bonded Coiled Air Hose | 1/4" x 1/4" Hose ID | 1/4" Male NPT Thread x 1/4" Swivel Male NPT Thread | Yellow/Natural | Nylon | 12ft
COILHOSE PNEUMATIC PRODUCTS PE-064-100 3/8" -OD Natural Poly Tube -RL/100'
PE064-100K by Coilhose | Tubing | 3/8" OD x .250" ID | .062" Wall thickness | Black | Polyethylene | 100ft
COILHOSE PNEUMATIC PRODUCTS PE-1215-100-K 12-MM -OD X 9-MM Poly Tube -RL/100'
PE1215-100K by Coilhose | Tubing | 12mm OD x 9mm ID | 1.0 mm Wall thickness | Black | Polyethylene | 100ft
Recently Viewed
ELECTRIC PLATE JOINERS WITH CASES-MAK3901>
28-VOLT .08-AMP WEDGE BASE BULB
Weiler® 21247 Power Tube Brush, 3/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.008 in Dia Filament/Wire, Steel Fill
Weiler® 21247 Power Tube Brush, 3/4 in Dia x 2-1/2 in L, 5-1/2 in OAL, 0.008 in Dia Filament/Wire, Steel Fill
Rust-Oleum® 2364838 2300 System High Performance Solvent Base Inverted Striping Paint, 18 oz Container, Liquid Form, Red, 275 to 300 linear ft/gal with 3 in W Stripe Coverage
Rust-Oleum High Performance 2300 System Inverted Striping Spray Paint creates bright, sharp and long-lasting lines for a variety of surfaces. This oil-based paint is ideal for parking lots, warehouse aisles, pallet positions, stadiums and more.
IDC Select® IDC F-60MM Finished Bore QD® Bushing, 60 mm Dia Bore, 4.437 in Dia Barrel, 6-5/8 in Dia Flange, 3-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
