Hose V-insert Clamps
1" X 1/4" BAND-IT JR CLAMP-DXN2429 >
1-1/16" OETIKER 2-EAR ZINC HOSE CLAMP
1-5/16" OETIKER 2-EAR ZINC HOSE CLAMP - DXN3134 >
3/8" -OD TUBE BRASS INSERTS--2 PER CARD-JWH431875 >
1/4" -OD TUBE BRASS INSERTS 2" PER CARD-JWH431964 >
1-3/4" 2-EAR OETIKER ZINC CLAMP - DXN4346>
Recently Viewed
This Wagner® WG840583 Direct Drive Furnace Blower Motors, 1/4HP, 1075/3 RPM, 3.8FLA, 115V motor installs with all standard 48 frame mounting brackets. It is protected by an automatic overload and class B insulation. The motor is electrically reversible and features 36 in. leads to ease installation.
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDE
1/8" CRESCENT RETAINING RINGS-ANR180012>
Proto® TorquePlus™ J3768 Flare Nut Wrench, Satin, Imperial, 1/2 x 9/16 in Double End Wrench, 6 Points, 7-1/2 in OAL, ASME B107.100
Martin 40BB17H 5/8 BB-H Ball Bearing Type A Idler Roller Chain Sprocket, 5/8 in Dia Bore, 2.97 in OD, 40 Chain, 17 Teeth, 1/2 in Pitch, Steel
Martin idlers are smooth-running and available in oil-impregnated, sintered bronze, extra-duty bearing press-fitted in sprocket and a hardened steel journal case for maximum resistance to wear. Steel sprockets used in Martin idlers are accurately machined (not stamped) the same as sprockets normally supplied for power transmission use. Martin can also alter existing sprockets and install bearings to make custom idlers.
#3 X 3" Taper Pins
