Flanges
2 RAISED FACE SLIP-ON FLANGES
2 RAISED FACE THREADED FLANGES
2 SCHEDULE 80 SLIP-ON FLANGES
2-1/2" RAISED FACE SLIP-ON FLANGES-FIT21/2BWFSLIP >
2-1/2" RAISED FACE THREADED FLANGE-FIT21/2BWFTHR >
2-1/2" SCHEDULE 80 SLIP-ON FLANGES-FIT21/2XHBWFSLIP >
2" -FEMALE PIPE THREAD METAL BLACK FLOOR FLANGE-JPW2BFF >
3 FLANGE PACKS
3 RAISED FACE SLIP ON FLANGES
3 RAISED FACE THREADED FLANGES
3 SCHEDULE 80 SLIP-ON FLANGES
3 SCHEDULE 80 THREADED FLANGE
3" FPT METAL BLACK FLOOR FLANGES
3" 250# THREADED PIPE FLANGE-JPW3THRFLANGE250#>
3/4" -FEMALE PIPE THREAD BLACK FLOOR FLANGES-FIT3/4BFF >
3/4" BLACK FLOOR FLANGE-JPW3/4BFF >
3/4" SCHEDULE 80 THREADED FLANGES-FIT3/4XHBWFTHR >
3/4" SCHEDULE 80 SLIP-ON FLANGES-FIT3/4XHBWFSLIP >
3/8" BLACK FLOOR FLANGES
4 -FEMALE PIPE THREAD RAISED FACE THREADED FLANGE
4 RAISED FACE SLIP-ON FLANGES
4 SCHEDULE-80 SLIP-ON FLANGE
4 SCHEDULE-80 THREADED FLANGES
4 X 1-1/2 FORGED STEEL WELD-O-LET-JPW4X11/2FSWO>
Recently Viewed
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
This is an O.E.M. authorized part. Fits various Porter Cable models. OEM Part Number 13904. Made in United States.
50/50 1-GALLON UNIVERSAL ANTIFREEZE - JWH570101>
14902" READY MOP CLEANER-JWH618932 >
Browning® 1045343 VP Series Type 1 Variable Pitch Sheave, 1/2 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 21/32 to 1-1/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
HCI Preferred Supplier STC-10 Hose to Pipe Adapter, Steel, 1 in Nominal, Barb x MNPT End Style, Galvanized
HCI Preferred Supplier 973908 Hose to Pipe Adapter, Steel, 1 in Nominal, Barb x MNPT End Style, Galvanized
