Spray Gun Accessories
12-FRAME 12" 4-wire Paint Roller Frame
12" 4-WIRE PAINT ROLLER FRAME -GRI12FRAME >
250694 DO IT BEST/HWI PRODUCTS
3-1/4" WALL DOOR STOP PATCH-N-GUARD-JWH250694>
275263 DO-IT-BEST
DRYWALL PATCHWET & SET WALL & CEILING PATCH-JWH275263 >
286370 DO-IT-BEST/HWI PRODUCTS
7-1/2" EXTENDABLE FLOOR ROLLERS-JWH286370>
771875 DO-IT-BEST/WAGNER CONTROL SPRAY DOUBLE DUTY SPRAYER
THREE DIFFERENT SPRAY PATTERNS (HORIZONTAL, VERTICAL & ROUND) TO PROVIDE GREATER PROJECT FLEXIBILITY. ADJUSTABLE SPRAY VOLUME FOR DIFFERENT PROJECT AND COATING NEEDS. RECEOMMENDED FOR WOOD STAIN, SEMI-TRANSPARENT STAIN AND SOLID STAIN. NOT RECOMMENDED FOR PAINT AND PRIMER
-JWH771875>
772195 DO-IT-BEST/SHUR-LINE GALLON PLASTIC PAINT ROLLER GRID
FITS DIRECTLY INTO A GALLON PAINT CAN. ELIMINATES THE NEED FOR A PAINT TRAY. LOADS PAINT QUICKLY AND EASILY FITS DIRECTLY INTO A GALLON CAN. ELIMINATES THE NEED FOR A PAINT TRAY. DESIGNED FOR USE WITH ALL MINI ROLLERS & TRIM ROLLERS
-JWH772195>
772355 DO-IT-BEST/BEST LOOK 0.95" X .013" SOFT GRIP CARBON STEEL WIRE BRUSH WITH SCRAPER
A COMFORTABLE WIRE BRUSH WITH A RUBBER HANDLE AND METAL SCRAPER. IT IS DESIGNED FOR DIFFICULT JOBS REQUIRING EXTRA SCRAPING PRESSURE. STIFF BRISTLES
-JWH772355 >
772710 DO IT BEST 18" X 36" TACK CLOTH
TACK CLOTH PICKS UP ALL TRACES OF DUST, DIRT, AND PARTICLES LEFT BY SANDING. DOES NOT MAR SURFACE. CAN BE USED OVER AGAIN, DOESN'T DRY OUT. CLOTH SIZE: 18" X 36" MESH
-JWH772710 >
772738 DO-IT-BEST/HWI PRODUCTS
10" SHUR-LINE PAINT TRIM GUIDE-JWH772738 >
772747 DO-IT-BEST/HWI PRODUCTS
15" SHUR-LINE PAINT TRIM GUIDE-JWH772747 >
772765 DO-IT-BEST/HWI PRODUCTS
PAINT EDGER REFILLS--CARD OF 2-JWH772765 >
772801 DO-IT-BEST/HWI PRODUCTS
3/4" X 50' BACKER ROD FILLER ROPE-JWH772801 >
773050 DO-IT-BEST/FROST KING HIGH DENSITY PLASTIC 9' X 12' .47 MIL DROP CLOTH
SUPER STRENGTH HIGH DENSITY CLEAR PLASTIC. STANDS UP TO YOUR TOUGHEST PAINTING PROJECTS. USE IT ALSO FOR STORAGE, COVERING APPLIANCES, AND MORE.
-JWH773050 >
773344 DO-IT-BEST/TIMCO SUPER TUFF PAINTER'S MITT
TRIMACO'S SUPERTUFF PAINTER'S MITT KEEPS HANDS CLEAN AND DRY WHEN PAINTING HARD TO REACH AREAS. OFFERING PROFESSIONAL QUALITY, IT IS GREAT FOR USE IN TOUGH SPOTS TO SAVE YOU TIME AND FRUSTRATION. YOU CAN EASILY CREATE TEXTURES AND ARTISTIC EFFECTS DURING FAUX FINISHING PROJECTS WHEN USING THIS MITT.
-JWH773344 >
773381 DO-IT-BEST/ALLWAY 1-1/4" SEAM ROLLER
THE SEAM ROLLER CAN BE USED TO SMOOTH AND SEAL WALLPAPER SEAMS AND EDGES, AS WELL AS CORNERS. THE 1-1/4" HARDWOOD ROLLER IS MOUNTED ON A CELCON PLASTIC HANDLE
-JWH773381 >
773470 DO-IT-BEST/HWI PRODUCTS
1.87-OZ NATURAL COLOR PLASTIC WOOD-JWH773470 >
773891 DO-IT-BEST/PREMIER 5 GALLON METAL PAINT ROLLER GRID
THE STURDY RUST-RESISTANT, PLATED GRID IS PRE-BENT TO SECURE THE GRID TO THE SIDE OF THE BUCKET. THE BOTTOM OF THE GRID RAMP KEEPS THE GRID STABLE AS THE ROLLER PASSES ACROSS THE SURFACE. THE GRID SURFACE REMOVES EXCESS PAINT AND DISTRIBUTES IT EVENLY ON THE ROLLER COVER TO ASSURE A GOOD RESULT ON THE PAINTING SURFACE 4-SIDED METAL MESH GRID.
JWH773891 >
775049 DO-IT-BEST/HWI PRODUCTS
03-510 SHUR-LINE PAINT ROLLER-JWH775049 >
Recently Viewed
3/4" A325 GALVANIZED FLAT WASHER-NBS893075GALV >
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
The Armstrong 28-330 is a premium industrial-grade 15/16" 12-point ratcheting flare nut wrench. Designed for use on tube fittings, valves, compression fittings, and fasteners, it features a ratcheting box end. The design lets you tighten and loosen fittings in tight spaces without removing the wrench from the nut.
2" X 30" NICKEL CONTINUOUS HINGES-NTL148270 >
Features:
Hardened for extra strength
Withstands stress under impact
Prevents rounding of fasteners' corners
"Lobular" design exerts force on flats of fasteners
Chamfered opening slips easily over fasteners and holds securely
Specifications:
No. of Points: 12
Opening: 1-1/2"
Weight: 3.56 lb
Overall Length: 11.75"
Head Thickness: 1.0"
Offset Height: 1.5"
Head Diameter: 2.187"
Handle Width: 1.343"
Handle Height: 1.343
Handle Length: 3.375"
Armstrong Industrial Tools 33-048 12 Point 45 Degree Offset Slugging Wrench 1-1/2"
60032 Mounted Points-3/4" X 1/4" A24 Maxrpm: 56.000. Shank Mounted Points And Grinding Wheels Are Made From Durable High Grade 60 Grit Aluminum
MOUNTED POINTS-3/4" X 1/4" A24 MAXRPM: 56.000. SHANK MOUNTED POINTS AND GRINDING WHEELS ARE MADE FROM DURABLE HIGH GRADE 60 GRIT ALUMINUM OXIDE-FOR60032 >
