Swivels

Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.

Crosby® 1016055 G-402 Regular Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.5 in x 1-1/4 in Eye

Crosby® 1016073 G-402 Regular Swivel, 3600 lb Load, 1/2 in Trade, Forged Steel, 1.31 in, 2 in x 1-1/2 in Eye

Crosby® 1016395 G-403 Jaw End Swivel, 850 lb Load, 1/4 in Trade, Forged Steel, 0.69 in, 0.88 in x 0.75 in, 0.47 in Eye

Crosby® 1016411 G-403 Jaw End Swivel, 1250 lb Load, 5/16 in Trade, Forged Steel, 0.81 in, 0.88 in x 1 in, 1/2 in Eye

Crosby® 1016439 G-403 Jaw End Swivel, 2250 lb Load, 3/8 in Trade, Forged Steel, 0.94 in, 1.06 in x 1.25 in, 0.63 in Eye

Crosby® 1016475 G-403 Jaw End Swivel, 5200 lb Load, 5/8 in Trade, Forged Steel, 1.56 in, 1.5 in x 1.75 in, 0.94 in Eye

Crosby® 1016493 G-403 Jaw End Swivel, 7200 lb Load, 3/4 in Trade, Forged Steel, 1-3/4 in, 1-3/4 in x 2 in, 1.13 in Eye

Crosby® 1016590 G-403 Jaw End Swivel, 45200 lb Load, 1-1/2 in Trade, Forged Steel, 3.88 in, 4.44 in x 4 in, 2.88 in Eye

The Crosby G-402 3/8" Regular Swivel (Manufacturer Part Number: 1016055) is a premium, heavy-duty eye-to-eye rigging component designed primarily as a positioning device to prevent the twisting and binding of slings, wire ropes, and inline connections. It is critical to note that this specific model is a positioning device only and is not engineered to rotate while under active load.

Product Type: Jaw & Eye Swivel (Model G-403).Size (Diameter): 1/2 inch. Working Load Limit (WLL): 3,600 lbs (1.8 short tons). Material: Forged carbon steel, quenched and tempered for maximum durability .Finish: Hot-dip galvanized for high corrosion resistance.

Working Load Limit (WLL): 850 lbs (approx. 385 kg) Safety Factor: 5:1 design ratio (Ultimate break strength of 4,250 lbs)Material: Forged steel, quenched and tempered Finish: Hot-dip galvanized for enhanced corrosion resistance Connection Type: Jaw-to-eye configuration with a 1/4-inch pin and retention cotter pin Dimensions: 2.63 inches width between eyes, 0.69" to 0.88" eye length

The Crosby G-403 3/4" is a heavy-duty Jaw End Swivel used as a positioning device in rigging, lifting, and wire rope assemblies. It connects inline components to prevent line twisting and reduce torque on rigging setups.

The Crosby G-403 7/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Positioning Swivel. Manufactured from quenched and tempered forged steel, this rigging component is specifically engineered as a positioning device to align your load assembly before lifting. It features a safety factor of 5:1 and is fully certified under the ASME B30.26 standard.

"Crosby 4035/16" does not pull up a direct product match in the official Kito Crosby rigging and lifting catalog. Because these numbers are highly relevant across multiple separate industrial part systems, it is likely a combination of a brand name and a specific size or a cross-referenced component.

The Crosby G-403 5/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Swivel engineered as a positioning device to prevent lifting lines, wire ropes, and slings from twisting and binding.