Manual Chain Hoists
Southwire® Sumner PCB050C30 Premium Low Headroom Chain Block Hoist With 30 ft Chain Fall, 0.5 ton Load
The 1/2 Ton Chain Hoist with a 30’ Chain Fall is designed to work in light industrial applications and has the capacity for 1/2-10 tons. It features a fused brake design. Its 360° alloy steel hooks make for flexible use on the job. The heat-treated load plates and internal components make for long-term durability. Additionally, this hoist complies with ANSI/ASME and OSHA standards.
Recently Viewed
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
1.750" X 2.125" X .188" OIL SEALS-TCM17211SB >
17792 Oil Seals a high-quality radial shaft oil seal designed primarily for automotive wheel-end assemblies and compact industrial gear drive
• Shaft Diameter (Inside Diameter): 1.772 inches (45.0 mm)
• Housing Bore (Outside Diameter): 2.835 inches (72.0 mm)
• Seal Width (Thickness): 0.228 inches (5.8 mm)
• Lip Material: Nitrile Rubber (NBR / Buna-N)
Browning® 1033307 BK Series Type 1 FHP Sheave, 7/8 in Finished Bore, 3.55 in OD, 2 Grooves, 3 in (A)/3-1/2 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
HCI Preferred Supplier 973891 Hose Mender, Coupling, 3/4 in, Steel
HCI Preferred Supplier 2404106 Straight Hydraulic Connector, 7/8-14 x 3/8 in Nominal, 37 deg Male JIC Flare x MNPT End Style, Steel
HCI Preferred Supplier 2404106 Straight Hydraulic Connector, 7/8-14 x 3/8 in Nominal, 37 deg Male JIC Flare x MNPT End Style, Steel
