Walter Surface Technologies
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 890A005 8900 Multi-Step Drill Bit, 1/4 in Dia Min Hole, 1-3/8 in Dia Max Hole, 10 Steps, HSS, 10 Hole Sizes, 1/2 in Shank
Drillco 890A003 8900 Multi-Step Drill Bit, 1/4 in Dia Min Hole, 3/4 in Dia Max Hole, 9 Steps, HSS, 9 Hole Sizes, 3/8 in Shank
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Drillco 890A001 8900 Multi-Step Drill Bit, 1/8 in Dia Min Hole, 1/2 in Dia Max Hole, 13 Steps, HSS, 13 Hole Sizes, 1/4 in Shank
Drillco 1000A143 Imperial Silver and Deming Drill, 43/64 in Drill - Fraction, 0.6719 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A144 Imperial Silver and Deming Drill, 11/16 in Drill - Fraction, 0.6875 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A148 1000 Imperial Silver and Deming Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A209 Imperial Silver and Deming Drill, 1-9/64 in Drill - Fraction, 1.1406 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A5 Silver and Deming Drill Set, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 5 Pieces, HSS, Uncoated
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000C156 Imperial Silver and Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
1000C series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Cobalt steel for drilling harder materials.
Drillco 1000C164 Imperial Silver and Deming Drill, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
1000C series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Cobalt steel for drilling harder materials.
Drillco 1000E219 Imperial Silver and Deming Drill, 1-19/64 in Drill - Fraction, 1.2969 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000E series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF140 Imperial Silver and Deming Drill, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF157 Imperial Silver and Deming Drill, 57/64 in Drill - Fraction, 0.8906 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF162 Imperial Silver and Deming Drill, 31/32 in Drill - Fraction, 0.9688 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Recently Viewed
The Grey Pneumatic 3/8" Drive x 7/16" Deep Universal Socket (1014UD) is a high-quality tool designed for professional mechanics and DIY enthusiasts. Crafted from durable chrome-molybdenum steel, this socket is built to withstand the rigors of demanding applications.
KEY FEATURES AND BENEFITS:
Universal Joint: Provides flexibility for reaching tight and hard-to-access areas.
Deep Socket: Allows for access to recessed bolts and nuts.
High Torque Drive: Efficiently transfers power to the fastener, reducing wear and tear.
Impact-Rated: Designed to withstand the force of impact tools.
Durable Construction: Made from high-quality chrome-molybdenum steel for long-lasting performance.
SPECIFICATIONS:
Drive Size: 3/8"
Socket Size: 7/16"
Material: Chrome-molybdenum steel
Impact Rated: Yes
Greenlee® Slug-Buster® 304AVBB Screw Unit Drive Replacement Draw Stud, Manual Driver, 3/4 in Dia x 2-15/16 in L, For Use With Slug-Buster® 730/737 Knockout Punches
Greenlee® Slug-Buster® 304AVBB Screw Unit Drive Replacement Draw Stud, Manual Driver, 3/4 in Dia x 2-15/16 in L, For Use With Slug-Buster® 730/737 Knockout Punches
Proto® J380T Replacement Tip, For Use With J380 Retaining Ring Plier
91511TP (often referred to and sold as model 1511TP) is a popular 11-piece, 1/2-inch drive, deep-length protector impact socket set. It is designed specifically to prevent scratching or damaging expensive alloy wheels and decorative lug nuts.
1/4"-DR NON-Q/RELEASE RATCHET - ALL10901 >
OIL SEAL-CHI27746>
