title-custom Walter Surface Technologies

Drillco 13/16" X 6-7/8" CAR REAMER DRL 428-A-152

Bridge Reamers

$130.44

Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank

Drillco 1308A116 1308 Imperial Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 8 in OAL, HSS

Extension Length Drill Bits

$32.94

For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.

Drillco 1308A122 Imperial Extra Length Drill, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 8 in OAL, HSS

Extension Length Drill Bits

$38.79

For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.

Drillco 15/16" X 6-7/8" CAR REAMER DRL 428-A-160

Bridge Reamers

$147.99

Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank

Drillco 172F1168 1720 Imperial Masonry Drill, 1/4 in Drill Bit, SDS-Plus Shank, 6 in D Cutting, Carbide Cutting Edge, 8-1/2 in OAL

Hammer Drill Bits

$23.19

SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.

Drillco 172F14010 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 8 in D Cutting, Carbide Cutting Edge, 10-1/4 in OAL

Hammer Drill Bits

$36.84

SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.

Drillco 172F14012 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12-1/4 in OAL

Hammer Drill Bits

$44.64

SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.

Drillco 172F14812 1720 Imperial Masonry Drill, 3/4 in Drill Bit, SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL

Hammer Drill Bits

$52.44

SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.

Drillco 175F1127 1750 Screw Anchor Imperial Masonry Drill, 3/16 in Drill Bit, SDS-Plus Shank, 4-1/8 in D Cutting, Carbide Cutting Edge, 7 in OAL

Hammer Drill Bits

$13.44

Hex shaft for attachment to sleeve driver to drive tapcon® screws.

Drillco 18-PC METRIC TAP/DRILL SETS--DISC DRL 800-A-2018

Tap & Drill Sets

$192.84

Drillco 800A2018 Single End Tap and Drill Set, 18 Pieces

DRILLCO 18-PC SAE/NF TAP AND DRILLBIT SETS DRL 400-NF-2018

Tap & Drill Sets

$185.04

Nitro® 400NF2018 Single End Tap and Drill Set, 18 Pieces, UNF Thread

DRILLCO 18-PC USS/NC TAP AND DRILLBIT SETS DRL 400-NC-2018

Tap & Drill Sets

$177.24

Nitro® 400NC2018 Single End Tap and Drill Set, 18 Pieces, UNC Thread

Drillco 2.5-MM BLACK/GOLD JOBBER DRILLBIT DRL 800-A-0250

Jobber Length Drill Bits

$1.94

Heavy-duty construction makes these drills suitable for more demanding applications. Designed for efficient drilling in stainless steel and tougher ferrous materials. The 135°split point reduces the thrust requirements and minimizes walking. Black & Gold

Drillco 2000A10 2000 Tap Set, Right Hand Cutting

Tap Sets

$165.54

Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in production tapping or hand operations in a wide range of application material groups.

Drillco 2000AW5 Tap and Reamer Wrench, 5/32 to 1/2 in Tap, 11 in L, Bar Handle

Tap Wrenches

$19.49

Adjustable straight handle tap wrenches have one threaded handle which is attached to one of the clamps. The clamp is opened to insert the tool and then tightened down against the tool to secure it. Used with larger taps, reamers or screw extractors.

Drillco 200A101 Jobber Length Drill Bit, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, 118 deg Point, HSS, Oxide Treated

Jobber Length Drill Bits

$2.13

200/240/280 series drills are designed for general purpose drilling under a wide range of conditions. For low to medium tensile strength materials. The surface treatment prevents chip welding, improves chip flow and increases abrasion resistance.

Drillco 200LH21 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Uncoated

Drill Bit Sets

$220.14

200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.

Drillco 200LH29 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 118 deg Drill Point Angle, 29 Pieces, HSS, Uncoated

Drill Bit Sets

$450.24

200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.