Walter Surface Technologies
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E110BB 3100E Adjustable Round Split Die, M11x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DB 3100E Adjustable Round Split Die, M10x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E090BB 3100E Adjustable Round Split Die, M9x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080CB 3100E Adjustable Round Split Die, M8x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080BB 3100E Adjustable Round Split Die, M8x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E070BB 3100E Adjustable Round Split Die, M7x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060CB 3100E Adjustable Round Split Die, M6x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060BB 3100E Adjustable Round Split Die, M6x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E050BB 3100E Adjustable Round Split Die, M5x0.8 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E045BB 3100E Adjustable Round Split Die, M4.5x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040BB 3100E Adjustable Round Split Die, M4x0.7 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040AB 3100E Adjustable Round Split Die, M4x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E035BB 3100E Adjustable Round Split Die, M3.5x0.6 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E030AB 3100E Adjustable Round Split Die, M3.0x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E025AB 3100E Adjustable Round Split Die, M2.5x0.45 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E124CC 3000E Adjustable Round Split Die, 3/8-16 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E120CC 3000E Adjustable Round Split Die, 5/16-18 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
DRILLCO 300N29 Screw Machine Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
Drillco 300LH11 Screw Machine Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 135 deg Drill Point Angle, 11 Pieces, M42 Cobalt HSS, Oxide Treated
M42 Cobalt High Speed Steel for super abrasive resistance in tough metals. Used in left hand screw machines and with screw extractors. Can be used to drill out broken bolts and other hardened fasteners. 11pc set in rollup pouch.
Drillco 300A132 Type C Heavy Duty Stub Length Screw Machine Length Drill, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
Drillco 300A128 Type C Heavy Duty Stub Length Screw Machine Length Drill, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
Recently Viewed
LUBRICATORS-MIL1128>
14.4" VOLT CORDLESS GREASE GUN WITH 2" 14.4" VOLT BATTERIES-ALM585B >
END PANELS-PNC11710H>
48" T-POSTS-PNC46TS04C>
Pacific Handy Cutterâ„¢ SP017 High Quality Blade, Carbon Steel, Utility Blade, 1.69 in L 0.74 in W Blade, 0.017 in THK
The SP-017 Blade features safety Pt. for added safety. While the blade is still extremely sharp, the blunted safety tips help prevent puncture wounds and damaged merchandise. The blade is designed to easily slice corrugated boxes and a great variety of other materials. This blade fits most safety cutters at Pacific Handy Cutter including the S4, S4S, S5, S7, S8, EZ1, EZ2+, EZ4, EZ7, GSC3, RZ3 and EZ3. The blades are packaged in a box of 100 blades and placed into paper tucks of five. For added convenience and safety the SP-017 Blades can also be purchased in our SPD-017 Blade Dispenser.
Extension, 1/2 in Drive, 5 in OAL
